Features: •Glitch-free transition between input sources•Internal logic selects input source•Gate drive for external PMOS bypass switch•5V detector with hysteresis•1% regulated output voltage accuracy•700mA load current capability•SO-8 and TO-263 packagesAp...
SC1537: Features: •Glitch-free transition between input sources•Internal logic selects input source•Gate drive for external PMOS bypass switch•5V detector with hysteresis•1% re...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
•Glitch-free transition between input sources
•Internal logic selects input source
•Gate drive for external PMOS bypass switch
•5V detector with hysteresis
•1% regulated output voltage accuracy
•700mA load current capability
•SO-8 and TO-263 packages
•= Desktop Computers
•= Network Interface Cards (NICs)
•= PCMCIA/PCI Interface Cards
•= CardbusTM Technology
•= Power supplies with multiple input sources
| Parameter | Symbol | Maximum | Units |
| Input Supply Voltage | VIN | -0.5 to +7 | V |
| Auxiliary Supply Voltage | VAUX | -0.5 to +7 | V |
| LDO Output Current | IO | 0 to +700 | mA |
| Operating Ambient Temperature Range | TA | 0 to +70 | °C |
| Operating Junction Temperature Range | Tj | 0 to +125 | °C |
| Storage Temperature Range | TSTG | -65 to +150 | °C |
| Lead Temperature (Soldering) 10 Sec | TLEAD | 300 | °C |
|
Thermal Impedance Junction to Ambient |
JA | 65 60 |
°C/W |
| Thermal Impedance Junction to Case SO-8 TO-263 |
J C | 39 3 |
°C/W |
| ESD Rating (Human Body Model) | ESD | 2 | kV |
The SC1537 is designed to maintain a glitch-free 3.3V output when at least one of two inputs, 5V (VIN) and 3.3V (VAUX), is present.
Whenever VIN exceeds a predetermined threshold value, the internal 3.3V linear regulator is enabled, and DR is pulled high.
When VIN falls below a lower threshold value, DR is pulled low and the internal linear regulator is turned off. DR has been designed to drive the gate of an external low threshold P-channel MOSFET, which can be used to connect the 3.3V supply directly to the regulator output. This ensures an uninterrupted 3.3V output even if VIN falls out of specification. A maximum RDS(ON) of 100m is recommended.
When both supplies are simultaneously available, the drive pin (DR) will be pulled High, turning off the external PMOS switch.
The internal 5V detector has its upper threshold (for VIN rising) set to 4.22V (typical) while the lower threshold (for VIN falling) is at 4.05V (typical) giving a hysteresis of approximately 170mV.
The SC1537 is available in the popular SO-8 and 5-lead TO-263 surface mount packages.