SCAN921023

Features: IEEE 1149.1 (JTAG) Compliant and At-Speed BIST test mode. Clock recovery from PLL lock to random data patterns. Guaranteed transition every data transfer cycle Chipset (Tx + Rx) power consumption <500 mW (typ) @66 MHz Single differential pair eliminates multi-channel skew660 Mbps ser...

product image

SCAN921023 Picture
SeekIC No. : 004485836 Detail

SCAN921023: Features: IEEE 1149.1 (JTAG) Compliant and At-Speed BIST test mode. Clock recovery from PLL lock to random data patterns. Guaranteed transition every data transfer cycle Chipset (Tx + Rx) power con...

floor Price/Ceiling Price

Part Number:
SCAN921023
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/12/26

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

IEEE 1149.1 (JTAG) Compliant and At-Speed BIST test mode.
Clock recovery from PLL lock to random data patterns.
Guaranteed transition every data transfer cycle
Chipset (Tx + Rx) power consumption <500 mW (typ) @66 MHz
Single differential pair eliminates multi-channel skew
660 Mbps serial Bus LVDS data rate (at66 MHz clock)
10-bit parallel interface for 1 byte data plus 2 control bits
Synchronization mode and LOCK indicator
Programmable edge trigger on clock
High impedance on receiver inputs when power is off
Bus LVDS serial output rated for 27 load
Small 49-lead BGA package





Specifications

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications

Supply Voltage(VCC) -0.3Vto+4V
LVCMOS/LVTTL Input Voltage -0.3V to (VCC +0.3V)
LVCMOS/LVTTL Output Voltage -0.3V to (VCC +0.3V)
Bus LVDS Receiver Input Voltage -0.3V to +3.9V
Bus LVDS Driver Output Voltage -0.3V to +3.9V
Bus LVDS Output Short Circuit Duration 10mS
Junction Temperature +150
Storage Temperature -65 to +150
Lead Temperature (Soldering, 4 seconds)+260
Maximum Package Power Dissipation Capacity @ 25 Package:
49L BGA 1.47 W
Package Derating:
11.8 mW/above
49L BGA+25
ja 85/W
ESD Rating
HBM >2kV
MM 250V







Function Serializer
Total Throughput 660 Mbps
Payload/Channel 660 Mbps
Clock Min 20 MHz
Clock Max 66 MHz
Input Compatibility LVTTL
Output Compatibility LVDS/BLVDS
Start/Stop Bit Yes
Power Consumption_ 248 mW
SupplyVoltage 3.3 Volt
ESD 2 kV
Temperature Min -40 deg C
Temperature Max 85 deg C
Compression Ratio 10:1
Number Transmitters 1
JTAG1149.1 Yes
Communications Yes
Sensing & Imaging Yes
Parallel Bus Width 10 bits
View Using Catalog





Description

The SCAN921023 and SCAN921224 are a 10-bit Serializer and Deserializer chipset designed to transmit data over differential backplanes at clock speeds from 20 to 66 MHz. The chipset is also capable of driving data over Unshielded Twisted Pair (UTP) cable.

The chipset SCAN921023 has three active states of operation: Initialization, Data Transfer, and Resynchronization; and two passive states: Powerdown and TRI-STATE. In addition to the active and passive states, there are also test modes for JTAG access and at-speed BIST.

The following sections describe each operation and passive state and the test modes.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Test Equipment
Inductors, Coils, Chokes
Batteries, Chargers, Holders
Cable Assemblies
Boxes, Enclosures, Racks
View more