SFH6700

Current Transfer Ratio :
Maximum Input Diode Current :
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Power Dissipation : 100 mW
Maximum Reverse Diode Voltage : 3 V
Maximum Operating Temperature : + 85 C
Maximum Forward Diode Voltage : 1.75 V
Package / Case : PDIP-8
Maximum Baud Rate : 5 MBps


Features:

• Data Rate 5.0 MBits/s (2.5 MBit/s over Temperature)
• Buffer
• Isolation Test Voltage, 5300 V RMS for 1.0 s
• TTL, LSTTL and CMOS Compatible
• Internal Shield for Very High Common Mode Transient Immunity
• Wide Supply Voltage Range (4.5 to 15 V)
• Low Input Current (1.6 mA to 5.0 mA)
• Three State Output (SFH6700/ 19)
• Totem Pole Output (SFH6701/ 02/ 11/ 12)
• Open Collector Output (SFH6705)
• Specified from 0 °C to 85 °C


Application

·Industrial Control
·Replace Pulse Transformers
·Routine Logic Interfacing
·Motion/Power Control
·High Speed Line Receiver
·Microprocessor System Interfaces
·Computer Peripheral Interfaces


Specifications

Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.

Description

The SFH6700 high speed optocoupler series consists of a GaAlAs infrared emitting diode, optically coupled with an integrated photo detector. The SFH6700 incorporates a Schmitt-Trigger stage for improved noise immunity. Using the Enable input, the output can switched to the high ohmic state, which is necessary for data bus applications. A Faraday shield provides a common mode transient immunity of 1000 V/ at VCM = 50 V for SFH6700/ 01/ 02/ 05 and 2500 V/ at VCM = 400 V for SFH6711/ 12/ 19.

The SFH6700 uses an industry standard DIP-8 package. With standard lead bending, creepage distance and clearance of 7.0 mm with lead bending options 6, 7, and 9 8 mm are achieved.