SIL465000

      The SIL465000(Phase angle controller  Output : 160-450VAC 32A(*) Input : Analog 0-10V) are Widely variety of applicated, Main frequency range(40 to 70 Hz with self adaptation), Analog control(Voltage 0-10V), Relay without trimmer (factory setting), Green LED visualization on the input,  Isolated internal power supply (taken from the mains),  Mounting and dismounting on DIN rail without any tool or directly mountable on panel with screws, Built in protection : RC and VDR, Designed in conformity with EN60947-4-3(IEC947-4-3) and EN60950, Transfer characterisic(Angle open loop), Operating voltage(160 to 450V), Operating Current(0.1 to 32A).
      The Output characteristics at 25°C of the SIL465000O are operating control voltage(Uc)=0 to 10V V, Maximum input voltage(Ucmax)=± 30V V, Input resistor(Rc)=20 kΩ,  Input immunity @ IEC 1000-4-4 (burst)=2kV, Input immunity  @IEC 1000-4-5(schocks)=2KV, Load voltage(Ue)=400 V rms, Operating range(Uemin-max)=160-450 V rms, Peak voltage(Up)=1200 V, Mains frequency range (fm)=40-70 Hz, Clamping voltage(Uclamp)=820 (@1mA), Dynamic resistance (typical value)(rt)=8 mΩ, Thermal resistance between junction to air(Rthj/a)=3,3 (2,5) K/W, Off state leakage current @Ue, 50Hz(Ilk)= <5 mA, Delay time @50Hz see fig. 2(td max)=20 ms, Power up initialisation time @Ue, 50Hz(t init.)=160 ms, Off state dv/dt(dv/dt)=500 V/µs, Maximum non repetitive di/dt(di/dt)=50 A/µs, Peak voltage (Up)=1200 V.
      And the General characteristics at 25°C of the SIL465000 are Input to output insulation voltage(Ui)=4000 VRMS, Output to status insulation voltage(Ui)=2500 VRMS, Output to case insulation voltage(Ui)=4000 VRMS, Insulation resistance(Ri)= 100 (@500VDC) MΩ, Ambient temperature (with no icing or condensation)=20 /+70 °C, Storage temperature (with no icing or condensation)=-40/+100 °C, Ambient humidity (HR)=40 to 85 %, Weight=270 g.