Features: · Maximum input current of 1 mA at 18 V over full packagetemperature range; 100 nA at 18 V and 25°C· Noise margin (over full package temperature range):-1.0 V min @ 5.0 V supply-2.0 V min @ 10.0 V supply-2.5 V min @ 15.0 V supplyPinoutSpecifications Symbol Parameter Value Uni...
SL4053B: Features: · Maximum input current of 1 mA at 18 V over full packagetemperature range; 100 nA at 18 V and 25°C· Noise margin (over full package temperature range):-1.0 V min @ 5.0 V supply-2.0 V min ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Symbol | Parameter |
Value |
Unit |
| VCC | DC Supply Voltage (Referenced to GND) |
-0.5 to +20 |
V |
| VIN | DC Input Voltage (Referenced to GND) |
-0.5 to VCC +0.5 |
V |
| VOUT | DC Output Voltage (Referenced to GND) |
-0.5 to VCC +0.5 |
V |
| IIN | DC Input Current, per Pin |
±10 |
mA |
| PD | Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ |
750 500 |
mW |
| PD | Power Dissipation per Output Transistor |
100 |
mW |
| Tstg | Storage Temperature |
-65 to +150 |
°C |
| TL | Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) |
260 |
°C |
The SL4053B analog multiplexer/demultiplexer is digitally controlled analog switches having low ON impedance and very low OFF leakage current. Control of analog signals up to 20V peak-to-peak can be achieved by digital signal amplitudes of 4.5 to 20V (if VCC - GND = 3V, a VCC - VEE of up to 13 V can be controlled; for VCC - VEE level differences above 13V a VCC - GND of at least 4.5V is required).
These multiplexer circuits of the SL4053B dissipate extremely low quiescent power over the full VCC -GND and VCC - VEE supply-voltage ranges, independent of the logic state of the control signals. When a logic "1"is present at the ENABLE input terminal all channels are off.
The SL4053B is a triple 2-channel multiplexer having three separate digital control inputs, A, B, and C, and an enable input. Each control input selects one of a pair of channels which are connected in a singlepole double-throw configuration.