Number of Input Lines
:
Number of Output Lines
:
Polarity
:
Maximum Operating Temperature
: + 85 C
Mounting Style
: SMD/SMT
Package / Case
: SOIC-16
Packaging
: Tube
Supply Voltage - Max
: 5.25 V
Supply Voltage - Min
: 4.75 V
DescriptionThe SN65LBC175D is designed as one kind of monolithic, quadruple, differential line receiver that is optimized for balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. And SN65LBC175D is available in the 16-pin DIP (N) and small-outline inline circuit (SOIC) D packages.
Features of the SN65LBC175D are:(1)Pin Compatible With SN75175 and MC3486; (2)Common-Mode Input Voltage Range of 7 V to 12 V; (3)Open-Circuit Fail-Safe Receiver Design; (4)Low-Power Consumption: 20 mA Max; (5)Input Sensitivity: ±200 mV; (6)Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments; (7)Designed to Operate With Pulse Durations as Short as 20 ns; (8)Meet or Exceed the EIA Standards RS-422-A, RS-423-A, RS-485, and CCITT Recommendation V.11.
The absolute maximum ratings of the SN65LBC175D can be summarized as:(1)Supply voltage range, VCC:0.3 V to 7 V;(2)Input voltage range: +/-25 V;(3)Differential input voltage, VID: +/-25 V;(4)Continuous total power dissipation: Internally limited;(5)Storage temperature range:65°C to 150°C;(6)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260°C;(7)Voltage range at Y, 1/2EN, 3/4EN:0.3 V to VCC + 0.5 V.
The electrical characteristics of the SN65LBC175D can be summarized as:(1)Positive-going input threshold voltage: 0.2 V;(2)Negative-going input threshold voltage: -0.2 V;(3)Hysteresis voltage (VIT+ VIT): 45 mV;(4)Enable input clamp voltage: 0.9 to 1.5 V;(5)High-level output voltage: 3.5 to 4.5 V;(6)Low-level output voltage: 0.3 to 0.5 V;(7)High-impedance-state output current: ±20 uA;(8)Short-circuit output current: 80 to 120 mA. If you want to know more information such as the electrical characteristics about SN65LBC175D, please download the datasheet in www.seekic.com or www.chinaicmart.com .
Parameters: | Technical/Catalog Information | SN65LBC175D |
| Vendor | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Number of Drivers/Receivers | 0/4 |
| Type | Line Receiver |
| Voltage - Supply | 4.75 V ~ 5.25 V |
| Package / Case | 16-SOIC (3.9mm Width) |
| Packaging | Tube |
| Protocol | RS422, RS423, RS485 |
| Drawing Number | 296; 4040047-4; D; 16 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | SN65LBC175D
SN65LBC175D
296 9717 5 ND
29697175ND
296-9717-5
|
SN65LBC175D Data Sheet
