PinoutSpecificationsSupply voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4 V Input voltage range, VI(DIN) . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .−0.3 V to (VCC +0.3 V) Enable input voltage (EN, EN ) ....
SN65LVDS047: PinoutSpecificationsSupply voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4 V Input voltage range, VI(DIN) . . . . . . . . . . ....
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

The SN65LVDS047 is a quad differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. Any of the four current-mode drivers SN65LVDS047 will deliver a minimum differential output voltage magnitude of 247 mV into a 100-Ω load when enabled.
The intended application of SN65LVDS047 and signaling technique is for point-to-point and multidrop baseband data transmission over controlledimpedance media of approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer SN65LVDS047 is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other system characteristics.
The SN65LVDS047 is characterized for operation from −40°C to 85°C.