Analog & Digital Crosspoint ICs 2X2 1.5 Gbps LVDS Crosspoint Switch
SN65LVDS122D: Analog & Digital Crosspoint ICs 2X2 1.5 Gbps LVDS Crosspoint Switch
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Configuration : | 2 x 2 | Package / Case : | SOIC-16 |
Data Rate : | 1.5 Gbps | Input Level : | CML, LVDS, LVPECL |
Output Level : | LVDS | Supply Voltage - Max : | 3.6 V |
Supply Voltage - Min : | 3 V | Maximum Operating Temperature : | + 85 C |
Minimum Operating Temperature : | - 40 C | Product : | Digital Crosspoint |
Packaging : | Tube |
The SN65LVDS122D belongs to SN65LVDS122 family which together with SN65LVDT122 are crosspoint switches that use low voltage differential signaling (LVDS) to achieve signaling rates as high as 1.5 Gbps. They are pin-compatible speed upgrades to the SN65LVDS22 and SN65LVDM22. lthough SN65LVDS122D is designed for 1.5 Gbps, some applications at a 2-Gbps data rate can be supported depending on loading and signal quality. This allows the flexibility to perform the following configurations: 2 x 2 crosspoint switch, 2:1 input multiplexer, 1:2 splitter or dual repeater/translator within a single device. Additionally, SN65LVDT122 incorporates a 110-S) termination resistor for those applications where board space is a premium. The internal signal paths maintain differential signaling for high speeds and low signal skews. SN65LVDS122D has a 0-V to 4-V common-mode input range that accepts LVDS, LVPECL, or CML inputs. Two logic pins (SO and S1) set the internal configuration be- tween the differential inputs and outputs. AThe intended application of SN65LVDS122D is ideal for Ioopback switching for diagnostic routines, fanout buffering of clock/data distribution provide protection in fault-tolerant systems, clock multiplexing in optical modules, and for overall signal boosting over extended distances. The SN65LVDS122 and SN65LVDT122 are characterized for operation from -40°C to 85°C.
The features of SN65LVDS122D can be summarized as (1)designed for signaling rates up to 1.5 Gbps; (2)total jitter <65 ps; (3)pin-compatible with SN65LVDS22 and SN65LVDM22; (4)25 mV of receiver input threshold hysteresis over 0-V to 4-V common-mode range; (5)inputs electrically compatible with CML, LVPECL and LVDS signal levels; (6)propagation delay times, 900 ps maximum; (7)LVDT integrates 110 terminating resistor; (8)offered in SOIC and TSSOP.
The absolute maximum ratings of SN65LVDS122D are (1)VCC supply voltage range(2) :0.5 V to 4 V; (2)Voltage range (A, B) :0.7 V to 4.3 V, |VA-VB| (LVDT only): 1 V, (DE, S0, S1): 0.5 V to 4 V, (Y, Z): 0.5 V to 4 V; (3)ESD human body model(3) A, B, Y, Z, and GND: ±4 kV, all pins: ±2 kV; charged-device model(4) all pins: ±1500 V; (4)continuous power dissipation: see dissipation rating table; (5)Tstg storage temperature range: 65°C to 150°C; (6)lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260°C.((1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal. (3) Tested in accordance with JEDEC Standard 22, Test Method A114-A.7. (4) Tested in accordance with JEDEC Standard 22, Test Method C101.).
Technical/Catalog Information | SN65LVDS122D |
Vendor | Texas Instruments |
Category | Integrated Circuits (ICs) |
Tx/Rx Type | LVDS |
Delay Time | 650ps |
Type | Crosspoint Switch |
Capacitance - Input | 3pF |
Current - Supply | 100mA |
Voltage - Supply | 3 V ~ 3.6 V |
Package / Case | 16-SOIC (3.9mm Width) |
Packaging | Tube |
Drawing Number | 296; 4040047-4; D; 16 |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | SN65LVDS122D SN65LVDS122D 296 13650 5 ND 296136505ND 296-13650-5 |