SN75LBC184P

Number of Input Lines :
Number of Output Lines :
Polarity :
Packaging : Tube
Mounting Style : Through Hole
Maximum Operating Temperature : + 70 C
Supply Voltage - Max : 5.25 V
Supply Voltage - Min : 4.75 V
Package / Case : PDIP-8


Description

The SN75LBC184P is designed as one kind of differential data line transceiver that can withstand overvoltage transients of 400 W peak (typical). This device also includes additional desirable features for party-line data buses in electrically noisy environment applications including industrial process control.

Features of the SN75LBC184P are:(1)integrated transient voltage suppression; (2)ESD protection for bus terminals: ±15 kV human body model and ±8 kV IEC1000-4-2, contact discharge, and ±15 kV IEC1000-4-2, air-gap discharge; (3)circuit damage protection of 400 W peak (typical); (4)controlled driver output-voltage slew rates allows longer cable stub lengths; (5)250-kbits/s in electrically noisy environments; (6)open-circuit fail-safe receiver design; (7)1/2 unit load allows for 64 devices connected on bus; (8)thermal shutdown protection; (9)power-up/-down glitch protection; (10)each transceiver meets or exceeds the requirements of EIA RS-485 and ISO/IEC 8482:1993(E) standards; (11)low disabled supply current 300 uA Max; (12)pin compatible with SN75176.

The absolute maximum ratings of the SN75LBC184P can be summarized as:(1)Supply voltage, VCC:0.5 V to 7 V;(2)Continuous voltage range at any bus terminal:15 V to 15 V;(3)Data input/output voltage:0.3 V to 7 V;(4)Continuous total power dissipation: Internally Limited;(5)Operating free-air temperature range: 0°C to 70°C;(6)Storage temperature range: -65°C to 150°C;(7)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260°C.

The electrical characteristics of the SN75LBC184P can be summarized as:(1)High-level input current: ±100 uA;(2)Low-level input current: ±100 uA;(3)Output voltage: 0 to 6 V;(4)Common-mode output voltage: 1 to 3 V;(5)Change in differential voltage magnitude between logic states: 0.2 V. If you want to know more information such as the electrical characteristics about it, please download the datasheet in www.seekic.com or www.chinaicmart.com .

Parameters:

Technical/Catalog Information	SN75LBC184P
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Number of Drivers/Receivers	1/1
Type	Transceiver
Voltage - Supply	4.75 V ~ 5.25 V
Package / Case	8-DIP (300 mil)
Packaging	Tube
Protocol	RS485
Drawing Number	296; 4040082; P; 8
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	SN75LBC184P SN75LBC184P 296 6884 5 ND 29668845ND 296-6884-5