ApplicationPDA'sPagersGPSHand Held Medical DevicesPinoutSpecificationsPower Supply, VDD.................................................7.0VInput Voltages, Logic.....................-0.3V to (VDD+0.3V)Lamp Outputs...................................................220VP-POperating Temperature.........
SP4501: ApplicationPDA'sPagersGPSHand Held Medical DevicesPinoutSpecificationsPower Supply, VDD.................................................7.0VInput Voltages, Logic.....................-0.3V to (VDD+0....
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PDA's
Pagers
GPS
Hand Held Medical Devices
Power Supply, VDD.................................................7.0V
Input Voltages, Logic.....................-0.3V to (VDD+0.3V)
Lamp Outputs...................................................220VP-P
Operating Temperature.........................-40°C to +85°C
Storage Temperature..........................-65°C to +150°C
Power Dissipation Per Package
14-pin SOIC
(derate 8.33mW/°C above +70°C)....................700mW
14-pin TSSOP
(derate 9.96mW/°C above +70°C)....................800mW
The SP4501 provides designers with both an electroluminescent lamp driver for backlighting and a piezotransducer driver to generate audio alert tones. The integration of an EL lamp driver and a piezotransducer driver in a single cost-effective IC reduces system cost, board space requirements and component count. The S P4501 is ideal for portable applications such as pagers, electronic games, PDAs, medical equipment, and designs with liquid crystal displays, keypads, and backlit readouts. The SP4501 will operate from a +2.2V to +6.0V source. The device features a low power standby mode which draws less than 1mA (typical). The frequency of the internal oscillator is set with a single external resistor. The piezotranducer driver can be driven with the internally generated clock signal or an external clock signal provided by the designer. A single inductor is required to generate the high voltage AC used to drive the EL lamp and the piezotransducer. All input pins are ESD protected with diodes to VDD and VSS.