SP6213EC5-2.7

The SP6213EC5-2.7 is one member of the SP6213 series.The SP6213 is a 100mA CMOS linear voltage regulator offered in an SC-70 package that reduces board space requirements by 50% over a SOT-23 package.  The SP6213 features low dropout voltage (250mV at 100mA ), low ground current (135A at full load) and low, 65A quiescent current.  Designed specifically for hand-held, battery powered devices, the device includes an enable/shutdown pin.  Regulator ground current increases only slightly in dropout to extend battery life.  The SP6213 is offered in an industry standard 5-pin SC-70 package.SP6213 is available in 1.8V, 2.5V, 2.7V, 2.85V, 3.0V, 3.3V and 5.0V fixed output voltages.

Features of the SP6213EC5-2.7 are:(1)tiny 5-pin SC-70 package; (2)guaranteed 100 mA output; (3)2.5% output voltage accuracy; (4)low dropout voltage: 250 mV at 100mA; (5)low quiescent current: 65 A; (6)low ground current: 135 A @ IL = 100mA; (7)low shutdown current: 1A MAX; (8)current limit: 190mA; (9)thermal shutdown: 168; (10)good load and line regulation; (11)fast transient response: TON/TOFF=80s; (12)low temperature coefficient; (13)unconditionally stable with 1F ceramic; (14)fixed outputs: 1.8V, 2.5V, 2.7V, 2.85V, 3.0V, 3.3V, 5V; (15)100mA replacement for 80mA MIC5213.

The absolute maximum ratings of the SP6213EC5-2.7 can be summarized as:(1)output voltage,Vcc:-0.6 to Vin+1 V;(2)enable input voltages:-2 to 7V;(3)storage temperature:-65 to 150;(4)lead temperature (soldering 5s):260;(5)power dissipation:internally limited.These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.An output capacitor is required between VOUT and GND to prevent oscillation. The minimum size of the output capacitor is a 0.47 F ceramic. The given datasheet values relate to an IC with a ceramic output capacitor of 1F. Larger values make the IC more stable which means an improvement of the regulator's transient response. For a lower output current, the output capacitance can be chosen smaller in order to have the same output stability.