DescriptionThe SP8042DB is one member of the SP8042 series.The SP8042 is a seven channel photo detector IC (PDIC) designed for DVD-ROM and CD-ROM applications and can operate at wavelength of 650 and 780 nm. The device contains four photo diode (sensor) arrays, two of them with four identical sens...
SP8042DB: DescriptionThe SP8042DB is one member of the SP8042 series.The SP8042 is a seven channel photo detector IC (PDIC) designed for DVD-ROM and CD-ROM applications and can operate at wavelength of 650 an...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The SP8042DB is one member of the SP8042 series.The SP8042 is a seven channel photo detector IC (PDIC) designed for DVD-ROM and CD-ROM applications and can operate at wavelength of 650 and 780 nm. The device contains four photo diode (sensor) arrays, two of them with four identical sensors (A D, and a - d respectively) and two with a single sensors (E, F). The seven channels consist of four high speed channels (Aa, Bb, Cc, and Dd), two slow channels (E, F), and one RF channel.
Features of the SP8042DB are:(1)dual wave length 650 and 780nm; (2)55MHz data channel bandwith; (3)built-in media switch; (4)available in wafer form or 5.0 x 4.0mm 16 pin COB package.The high speed channel output provides a signal from one of the two different sensor arrays (AD or ad) depending the position of the media switch (SW). A high logic level at the SW pin selects CD mode (AD sensors) while a low level selects DVD mode (ad sensors). The E and F channels output is used for a servo control. The RF channels output is sum of A + B + C + D or a + b + c + d channels (depending upon SW level) with identical weights given to all channels.
The absolute maximum ratings of the SP8042DB can be summarized as:storage temperature:-30 to 80.The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s).In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement.In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.