Purchase SP8902 (MP), In-stock SP8902 (MP) From SeekIC.
Part Number: SP8902 (MP)
Description: The SP8902 is one of a range of very high speed low power prescalers for professional applications. Th...
- Table of contents:
SP8902 (MP)
-
Suppliers
DataSheet
General Description
SP8902 (MP) General Description
The SP8902 is one of a range of very high speed low power prescalers for professional applications. The dividing elements are static D type flip flops and therefore allow operation down to DC if the drive signal is a pulse waveform with fast risetime. The output stage has a differential current output and provides a direct drive into a 50 ohm load.
SP8902 (MP) Maximum Ratings
Supply voltage, VCC................................................6·5V
Storage temperature..........................265°C to 1150°C
Maximum junction temperature..........................1150°C
Prescaler input voltage......................................2·5Vp-p
Operating temperatureKG..........240°C to 185°C TCASE
Storage temperature..........................265°C to 1150°C
Maximum junction temperature..........................1150°C
Prescaler input voltage......................................2·5Vp-p
Operating temperatureKG..........240°C to 185°C TCASE
SP8902 (MP) Features
· Very High Operating Speed
· Operation down to DC with Square Wave Input
· Silicon Technology for Low Phase Noise
(Typically better than 2140dBc/Hz at 1KHz)
· 5V Single Supply Operation
· Low Power Dissipation: 335mW (Typ.)
· Surface Mount Plastic Package
· Operation down to DC with Square Wave Input
· Silicon Technology for Low Phase Noise
(Typically better than 2140dBc/Hz at 1KHz)
· 5V Single Supply Operation
· Low Power Dissipation: 335mW (Typ.)
· Surface Mount Plastic Package
SP8902 (MP) Connection Diagram
SP8902 (MP)
PDF/DataSheet Download
- Datasheet: SP8902 (MP)
- File Size: 122735 KB
- Manufacturer: Zarlink
- Click here to Download
- ·SP800L
- SIPEX [Sipex Corporation]
- Low Power Microprocessor Supervisory with Battery Switch-Over
- 201148 KB
- ·SP800LCN
- SIPEX [Sipex Corporation]
- Low Power Microprocessor Supervisory with Battery Switch-Over
- 201148 KB
- ·SP800LCN/TR
- SIPEX [Sipex Corporation]
- Low Power Microprocessor Supervisory with Battery Switch-Over
- 201148 KB
- ·SP800LCP
- SIPEX [Sipex Corporation]
- Low Power Microprocessor Supervisory with Battery Switch-Over
- 201148 KB
- ·SP800LCT
- SIPEX [Sipex Corporation]
- Low Power Microprocessor Supervisory with Battery Switch-Over
- 201148 KB
- ·SP800LCT/TR
- SIPEX [Sipex Corporation]
- Low Power Microprocessor Supervisory with Battery Switch-Over
- 201148 KB
- ·SP800LEN
- SIPEX [Sipex Corporation]
- Low Power Microprocessor Supervisory with Battery Switch-Over
- 201148 KB
- ·SP800LEN/TR
- SIPEX [Sipex Corporation]
- Low Power Microprocessor Supervisory with Battery Switch-Over
- 205359 KB
SP8902 (MP) Relative Products
SP8902
The SP8902 is one of a range of very high speed low power prescalers for professional applications. The dividing elements are static D type flip flops and therefore allow operation down to DC if the drive signal is a pulse waveform with fast risetime. The ou...
SP8861
The SP8861 is a low power single chip synthesiser intended for professional radio applications, containing all the elements (apart from the loop amplifier) required to build a PLL frequency synthesis loop.The SP8861 is serially programmable by a three-wire d...
SP8858
The SP8858 is a single chip synthesiser intended for PLL signal synthesis applications up to 1.5GHz and includes a dual modulus prescaler (4N/N11), programmable A, M and R dividers, digital phase detector, charge pump and lock detect circuits.The SP8858 is a...
SP8855E
The SP8855E is one of a family of parallel load synthesisers containing all the elements apart from the loop amplifier to fabricate a PLL synthesis loop. Other devices in the series are the SP8852E which is a fully programmable device requiring two 16 bit wo...
SP8855D
The SP8855D is one of a family of parallel load synthesisers containing all the elements apart from the loop amplifier to fabricate a PLL synthesis loop. Other parts in the series are the SP8852D which is a fully programmable device requiring two 16 bit word...
SP8854E
The SP8854E is one of a family of parallel load synthesisers containing all the elements apart from the loop amplifier to fabricate a PLL synthesis loop. Other parts in the series are the SP8852E which is fully programmable, requiring tw0 16- bit words to se...
Hotspot Suppliers Product
BTS4140N
Price: 0.3-0.5 USD
smart high-side power switch, 62V, SOT223-4, Short circuit protection, 1 x 1Ω
MC34063API
Price: 1-2 USD
MC34063API
CY7B923-JXC
Price: 29-32 USD
IC TRANSMITTER HOTLINK 28-PLCC - CY7B923-JXC
FT232RL
Price: 0.1-2 USD
USB, SSOP28, -0.5 to +6.00 V, optional clock generator output, USB UART interface Integrated Circu...
ISO122P
Price: 7-8.5 USD
precision isolation amplifier, DIP, 2pF, ±100V, high IMR, high-voltage breakdown
SPI-50X3E120
Price: 9.9-10.9 USD
1.5V to 3.3V, SPI-50X3E120, Transistor, Sanyo Semicon Device
VW2010
Price: 10-11 USD
audio/video CODEC chip, BGA, MPEG-1/-2/-4
G6S-2 DC5V
Price: 0.63-0.69 USD
Low Signal Relay, 0.5 A, High dielectric withstand voltage, reel packaging option available
MCC56-12IO1B
Price: 20-30 USD
Thyristor Modules, IXYS, 100A, 10W, MCC56-12IO1B, 3000V or 3600V, TO-240 AA
IRF3007PBF
Price: 1-2 USD
N-channel MOSFET, 75V, 75A, TO-220AB, 200W, RoHS Compliant, Through Hole
TLP785
Price: 1-2 USD
Photocoupler, DIP, 60 mA, high isolation voltage, 150 mW
PEF22554HTV2.1
Price: 25-28 USD
quad E1/T1/J1 Framer, QFP-144, -0.3 to 3.6V
