Features: SpecificationsDescriptionThe SP8916(MP) is one of a range of very high speed low power prescalers for professional applications.The dividing elements are static D type flip flops and therefore allow operation down to DC if the drive signal is a pulse waveform with fast risetime. The outp...
SP8916(MP): Features: SpecificationsDescriptionThe SP8916(MP) is one of a range of very high speed low power prescalers for professional applications.The dividing elements are static D type flip flops and there...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: · Very High Operating Speed· Operation down to DC with Square Wave Input· Silicon Tec...
The SP8916(MP) is one of a range of very high speed low power prescalers for professional applications.The dividing elements are static D type flip flops and therefore allow operation down to DC if the drive signal is a pulse waveform with fast risetime. The output stage has internal100 ohm pull up resistors, giving a 0.5V p-p output.If required, an external 100 ohm can be connected in parallel to give a 50 ohm output.
The SP8916(MP) has some absolute maximum ratings.When parameter is supply voltage,Vcc,the rating is 6.5V.When parameter is storage temperature range,the rating is -65 to +150.When parameter is Max. junction temperature,the rating is +150.When parameter is prescaler input voltage,the rating is 2.5V p-p.When parameter is operating temperature,the rating is KG-40 to +85 TCASE.
This publication of SP8916(MP) is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. SP8916(MP) is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink's conditions of sale which are available on request.