Purchase T2322, In-stock T2322 From SeekIC.

|
Rating |
Suffix |
Symbol |
Value |
Unit |
| Peak Repetitive Off-State Voltage(1) (TJ = 25 to 100°C, Gate Open) T2322, T2323 |
B D M |
VDRM |
200 400 600 |
Volts |
| RMS On-State Current (TC = 70°C) (Full-Cycle Sine Wave 50 to 60 Hz) |
IT(RMS) |
2.5 |
Amps | |
| Peak Non-repetitive Surge Current (One Full Cycle, 60 Hz) |
ITSM |
25 |
Amps | |
| Circuit Fusing (t = 8.3 ms) |
I2t |
2.6 |
A2s | |
| Peak Gate Power (1 ms) |
PGM |
10 |
Watts | |
| Average Gate Power (TC = 60°C + 38.3 ms) |
PG(AV) |
0.15 |
Watt | |
| Peak Gate Current (1 s) |
IGM |
0.5 |
Amp | |
| Operating Junction Temperature Range |
TJ |
40 to +110 |
°C | |
| Storage Temperature Range |
Tstg |
40 to +150 |
°C | |
| Mounting Torque (6-32 Screw)(2) |
- |
8 |
in. lb. | |
1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
2. Torque rating applies with use of torque washer (Shakeproof WD19523 or equivalent). Mounting Torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Main terminal 2 and heat-sink contact pad are common. For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200°C, for 10 seconds. Consult factory for lead bending options.
T2322
PDF/DataSheet Download








