TC9200

The TC9200 Series Indoor Camera Mounts can be used with CCD cameras with fixed lenses.These sturdy, attractive mounts have fully adjustable mount heads and standard 1/4-20 camera mounting bolts. Maximum load capability ranges from 2kg (4.4 lb) to 10 kg (22 lb).These versatile models can be used as pedestal, wall, or ceiling mounts andare well suited for use with CCDcameras.

Model TC9200 is an economical 200 mm (8 in) general purpose mount for loads of up to 4 kg (8.8 lb). It has an aluminum finish and an adjustable sleeve ball mounting clamp for camera position adjustments.

up to 10 kg (22 lb) in both the short and the fully extended configurations and features a quick release screw head for ease of camera positioning. The right angle curve in the support arm of the TC9203 model mount can accommodate many difficult mounting requirements.A universal wall/ceiling mount, this model has a length of 230 mm (9.1 in) and can handle cameras of up to 10 kg (22 lb). Model TC9205 is an economical 127 mm (5 in) general purpose mount which can handle loads of up to 2 kg (4.4 lb).This mount features an aluminum finish and an adjustable sleeve ball mounting clamp.The two mounting holes in the base flange allow for direct mounting to a standard electrical box (3 1/4 inch centers) and an opening in its hollow shaft permits a direct cable feed to the mounting head from the base to the camera.

(10 lb) and is constructed of aluminum and steel, providing extremely rigid camera mounting. The TC9206U, a 150 mm (6 in) unit, is designed to be used in either a suspended ceiling or solid wall/ceiling mounting location. Supplied with two mounting bases, it can be easily adapted to either configuration. An economical general purpose mount, the TC9207 model accommodates loads of up to 4 kg (8.8 lb). It utilizes a sleeve ball mounting clamp and comes in an aluminum finish with an off-whitebase flange.

The LDH 6372/00 indoor mount is an economical wall mount with a minimum length of 63 mm and a maximum length of 191 mm (2.5 in to 7.5 in). Featuring threaded extensions, this unit can be configured to three different lengths and is easily installed with the included mounting hardware. While designed originally for use with the LDH series of CCD cameras, this unit can also be used with many model CCD cameras.

An economical general purpose mount, the TC9207 model accommodates loads of up to 4 kg (8.8 lb). It utilizes a sleeve ball mounting clamp and comes in an aluminum finish with an off-white
base flange.

The LDH 6372/00 indoor mount is an economical wall mount with a minimum length of 63 mm and a maximum length of 191 mm (2.5 in to 7.5 in). Featuring threaded extensions, this unit can be configured to three different lengths and is easily installed with the included mounting hardware. While designed originally for use with the LDH series of CCD cameras, this
unit can also be used with many model
CCD cameras.