TL082CP

Output Current :
Number of Channels : 2
Packaging : Tube
Shutdown : No
Common Mode Rejection Ratio (Min) : 70 dB
Mounting Style : Through Hole
Package / Case : PDIP-8
Maximum Operating Temperature : + 70 C
Input Offset Voltage : 15 mV
Operating Supply Voltage : 30 V
Input Bias Current (Max) : 200 pA
Slew Rate : 13 V/us


Pinout






Specifications

		TL08_C TL08_AC TL08_BC	TL08_I	TL084Q	TL08_M	UNIT
Supply voltage, VCC+ (see Note 1)		18	18	18	18	V
Supply voltage VCC− (see Note 1)		−18	−18	−18	−18	V
Differential input voltage, VID (see Note 2)		± 30	± 30	± 30	± 30	V
Input voltage, VI (see Notes 1 and 3)		±15	±15	±15	±15	V
Duration of output short circuit (see Note 4)		Unlimited	Unlimited	Unlimited	Unlimited
Continuous total power dissipation		See Dissipation Rating Table
Operating free-air temperature range, TA		0 to 70	− 40 to 85	− 40 to 125	− 55 to 125	°C
Package thermal impedance, JA (see Notes 5 and 6)	D package (8-pin)	97	97			°C/W
	D package (14-pin)	86	86
	N package (14-pin)	76	76
	NS package (14-pin)	80
	P package (8-pin)	85	85
	PS package (8-pin)	95	95
	PW package (8-pin)	149
	PW package (14-pin)	113	113
Operating virtual junction temperature		150	150	150	150	°C
Case temperature for 60 seconds, TC	FK package				260	°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds	J or JG package				300	°C
Storage temperature range, Tstg		− 65 to 150	− 65 to 150	− 65 to 150	− 65 to 150	°C

Description

The TL082CP is one member of the TL08 family which designed as the JFET-input operational amplifier that designed to offer a wider selection than any previously developed operational amplifier family. It features high slew rates, low input bias and offset currents, and low offset voltage temperature coeffi-cient and the compression or ultrasonic bonding may be used on the doped aluminum bonding pads.

Features of the TL082CP are:(1)latch-ip-free operation;(2)high slew rate:13 V/ms typ;(3)common-mode input voltage range includes Vcc+;(4)internal frequ-ency compensation (except TL080, TL080A);(5)high input impedance:JFET-input stage;(6)low total harmonic distortion:0.003% typ;(7)output short-circuit protection;(8)low input bias and offset currents;(9)wide common-mode and differential voltage ranges;(10)low-power consumption.

The absolute maximum ratings of the TL082CP can be summarized as:(1)supply voltage, Vcc+:18 V;(2)supply voltage Vcc-:-18 V;(3)differential input voltage: ±30 V;(4)input voltage:±15 V;(5)duration of output short circuit:unlimited;(6)continuous total dissipation:see dissipation rating table;(7)operating free-air temperature range:0 to 70 °C;(8)storage temperature range:-65 to 150 °C;(9)case temperature for 60 seconds:260 °C;(10)lead temperature 1,6 mm (1/16 inch) from case for 60 seconds:300 °C;(11)lead temperature 1,6 mm (1/16 inch) from case for 10 seconds:260 °C. If you want to know more information such as the electrical characteristics about the TL082CP, please download the datasheet in www.seekic.com or www.chinaicmart.com .

Parameters:

Technical/Catalog Information	TL082CP
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	J-FET
Number of Circuits	2 - Dual
Package / Case	8-DIP (300 mil)
Slew Rate	13 V/s
Gain Bandwidth Product	3MHz
Current - Supply	1.4mA
Current - Output / Channel	-
Voltage - Supply, Single/Dual (±)	7 V ~ 36 V, ±3.5 V ~ 18 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	30pA
Operating Temperature	0°C ~ 70°C
Voltage - Input Offset	3000V
Drawing Number	296; 4040082; P; 8
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TL082CP TL082CP 296 1780 5 ND 29617805ND 296-1780-5