TLE6254-3G

Product : Controller Area Network (CAN)
Number of Transceivers : 1
Maximum Operating Temperature : + 125 C
Mounting Style : SMD/SMT
Packaging : Reel
Package / Case : DSO
Data Rate : 125 KBd
Supply Current (Max) : 0.06 mA, 10 mA


Features:

• Data transmission rate up to 125 kBaud
• Low current consumption in stand-by and sleep operation mode, including BUS wake-up
• Implemented receive-only mode
• Optimized EMC behavior
• Wake-up input pin, dual edge sensitive
• Battery fail flag
• Extended bus failure management to guarantee safe operation during all bus line failure events
• Support of failure conditions (ISO11898-3)
• Fully wake-up capability during all bus line failures conditions
• Supports one-wire transmission mode with ground offset voltages up to 1.5 V
• Prevention from bus occupation in case of CAN controller failure
• Thermal protection
• Bus line error protection against transients in automotive environment


Pinout




Specifications

Parameter	Symbol	Limit Values		Unit	Notes
		Min.	Max.
Input voltage at VBAT	VS	-0.3	40	V	-
Logic supply voltage VCC	VCC	-0.3	6	V	-
Input voltage at TxD, RxD, NERR, NSTB and ENT	VIN	-0.3	VCC + 0.3	V	-
Input voltage at CANH and CANL	VBUS	-40	40	V	-
Transient voltage at CANH and CANL	VBUS	-150	100	V	1)
Input voltage at WAKE	VWK	-40	40	V	-
Input voltage at INH	VINH	-0.3	VBAT +0.3	V	-
Input voltage at RTH and RTL	V RTH/L	-0.3	40	V	-
Junction temperature	Tj	-40	160		-
Storage temperature	Tstg	-55	155		-
Electrostatic discharge voltage at pin CANH, CANL, RTH, RTL, VBAT	Vesd	-4	4	kV	2)
Electrostatic discharge voltage at any other pin	Vesd	-2	2	kV	2)

1) See ISO 7637
2) Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k resistor.
Note: Stresses above those listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.


Description

The CAN-Transceiver TLE6254-3G works as the interface between the CAN protocol controller and the physical CAN bus-lines.

TLE6254-3G is optimized for low-speed data transmission (up to 125 kBaud) in automotive and industrial applications.

While no data TLE6254-3G is transferred, the power consumption can be minimized by multiple low power modes.

In normal operation mode a differential signal TLE6254-3G is transmitted/received. When bus wiring failures are detected the device automatically switches in a dedicated single-wire mode to maintain communication.


Parameters:

Technical/Catalog Information	TLE6254-3G
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Number of Drivers/Receivers	1/1
Type	Transceiver
Voltage - Supply	4.75 V ~ 5.25 V
Package / Case	DSO-14
Packaging	Tape & Reel (TR)
Protocol	CAN
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TLE6254 3G TLE62543G