Purchase TLP3250, In-stock TLP3250 From SeekIC.
Package Cooled:SS0P4


Part Number: TLP3250
Package Cooled: SS0P4
Description: The TOSHIBA TLP3250 is a super small-outline photorelay, suitable for surface-mount assembly.
Package Cooled:SS0P4


Package Cooled: SS0P4
Description: The TOSHIBA TLP3250 is a super small-outline photorelay, suitable for surface-mount assembly.
The TOSHIBA TLP3250 is a super small-outline photorelay, suitable for surface-mount assembly.
The TLP3250 consists of a GaAℓAs infrared-emitting diode optically coupled to a photo-MOS FET and housed in a 4-pin package. Its characteristics also include low OFF-state current and low output pin capacitance, enabling it to be used in high-frequency measuring instruments.
|
CHARACTERISTIC |
SYMBOL |
RATING |
UNIT | |
|
LED |
Forward Current |
IF |
30 |
mA |
| Forward current derating (Ta85) |
IF/Ta |
-0.3 |
mA | |
| Peak transient forward current (Note1) |
IFPT |
5 |
A | |
| Reverse Voltage |
VR |
125 |
V | |
|
DETECTOR |
Off-State Output Terminal Voltage | VDRM |
20 |
V |
| On-State RMS Current | IT(RMS) |
200 |
mA | |
| On-State Current Derating (Ta25) |
IT/ |
-2.0 |
mA / | |
| Junction Temperature |
Tj |
125 |
||
| Storage Temperature Range |
Tstg |
-40~125 |
||
| Operating Temperature Range |
Topr |
-20to85 |
||
| Lead Soldering Temperature(10s) |
Tsol |
260 |
||
| Isolation voltage (AC,1min.,R.H.60%,Ta=25) Note2 |
BVS |
1500 |
Vrms | |
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and thesignificant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
(Note 1): Device considered a two-terminal device: Pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
TLP
PDF/DataSheet Download








