TS4601B

Features: ` Power supply range: 2.9 V to 5.5 V` 107 dB of PSRR at 217 Hz` Fully differential inputs` I²C interface for volume control` Digital volume control range from -60 dB to +4 dB` 101 dB of SNR A-weighted ` Independent right and left channel shutdown control` Low quiescent current: 4.8 ...

product image

TS4601B Picture
SeekIC No. : 004528737 Detail

TS4601B: Features: ` Power supply range: 2.9 V to 5.5 V` 107 dB of PSRR at 217 Hz` Fully differential inputs` I²C interface for volume control` Digital volume control range from -60 dB to +4 dB` 101 dB ...

floor Price/Ceiling Price

Part Number:
TS4601B
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/5/20

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

` Power supply range: 2.9 V to 5.5 V
` 107 dB of PSRR at 217 Hz
` Fully differential inputs
` I²C interface for volume control
` Digital volume control range from -60 dB to +4 dB
` 101 dB of SNR A-weighted
` Independent right and left channel shutdown control
` Low quiescent current: 4.8 mA typ. at 3.0 V
` Low standby current: 2 A max
` Output-coupling capacitors removed
` Flip-chip package 2.1 mm x 2.1 mm, 500 m pitch, 16 bumps



Application

·Cellular phones
· Notebook computers
· CD/MP3 players



Specifications

Symbol Parameter Value Unit
VCC Supply voltage (1) 6 V
Vin Input voltage
In Master standby mode, and I²C mode 1, 6 and 7
In I²C mode 2, 3, 4 and 5
0 to VCC
-2.4 to +2.4
V
Tstg Storage temperature -65 to +150
Tj Maximum junction temperature 150
Rthja Thermal resistance junction to ambient (2) 200 /W
Pd Power dissipation Internally limited(3)  
ESD HBM - human body model - all pins (4)
VOUTL, VOUTR vs. VCC, GND
2
4
kV
MM - machine model (min. value)(5) 200 V
CDM - charge device model 500 V
IEC61000-4-2 level 4, contact (6)
IEC61000-4-2 level 4, air discharge (6)
+/- 8
+/- 15
kV
Latch-up Latch-up immunity 200 mA
  Lead temperature (soldering, 10sec) 260

1. All voltage values are measured with respect to the ground pin.
2. The device is protected in case of over temperature by a thermal shutdown active @ 150.
3. Exceeding the power derating curves during a long period may provoke abnormal operation.
4. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 k resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating.
5. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 ). This is done for all couples of connected pin combinations while the other pins are floating.
6. The measurement is performed on the evaluation board, with an STMicroelectronics ESD protection EMIF02-AV01F3



Description

The TS4601B is a stereo headphone driver dedicated to high audio performance and spaceconstrained applications. It has the same uses as the TS4601 which it replaces, while offering highly improved ESD ratings.

It is based on low power dissipation amplifier core technology. Special care was taken in the design
of the amplification chain to achieve peerless PSRR (107 dB typ. at 217 Hz) and 101 dB of SNR.

The TS4601B can drive 0.9 Vrms output voltage into 16 and 1.6 Vrms into 10 k, whatever the power supply voltage, in the 2.9 V to 5.5 V range.

An I²C interface offers volume control in 64 steps from -60 dB to +4 dB and multiple configuration modes for the device.

The traditionally used output-coupling capacitors can be removed and a dedicated common-mode sense pin removes parasitic noise from the jack.

The TS4601B is designed to be used with an output serial resistor. It ensures unconditional stability over a wide range of capacitive loads.

The TS4601B is packaged in a tiny 16-bump flipchip with a pitch of 500 m and a 300 m diameter ball size.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Isolators
Memory Cards, Modules
Test Equipment
Prototyping Products
DE1
Cables, Wires - Management
Line Protection, Backups
View more