U1AFS1500-FG256

Mounting Type: Surface Mount
Number of LABs/CLBs: -
Operating Temperature: 0°C ~ 85°C
Package / Case: 256-LBGA
Supplier Device Package: 256-FPBGA (17x17)
Manufacturer: Microsemi SoC
Number of Logic Elements/Cells: -
Voltage - Supply: 1.425 V ~ 1.575 V
Total RAM Bits: 276480
Series: Fusion®
Number of I /O: 119
Number of Gates: 1500000


Application

Operating Conditions
Stresses beyond those listed in Table 3-1 may cause permanent damage to the device. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. Devices should not be operated outside the recommended operating ranges specified in Table 3-2 on page 3-3.

Specifications

Symbol	Parameter	Commercial	Industrial	Units
VCC	DC core supply voltage	0.3 to 1.65	0.3 to 1.65	V
VJTAG	JTAG DC voltage	0.3 to 3.75	0.3 to 3.75	V
VPUMP	Programming voltage	0.3 to 3.75	0.3 to 3.75	V
VCCPLL	Analog power supply (PLL)	0.3 to 1.65	0.3 to 1.65	V
VCCI	DC I/O output buffer supply voltage	0.3 to 3.75	0.3 to 3.75	V
VI	I/O input voltage1	0.3 V to 3.6 V (when I/O hot insertion mode is enabled) 0.3 V to (VCCI + 1 V) or 3.6 V, whichever voltage is lower (when I/O hot-insertion mode is disabled)		V
VCC33A	+3.3 V power supply	0.3 to 3.752	0.3 to 3.752	V
VAREF	Voltage reference for ADC	0.3 to 3.75	0.3 to 3.75	V
VCC15A	Digital power supply for the analog system	0.3 to 1.65	0.3 to 1.65	V
VCCNVM	Embedded flash power supply	0.3 to 1.65	0.3 to 1.65	V
VCCOSC	Oscillator power supply	0.3 to 3.75	0.3 to 3.75	V
AV, AC	Unpowered, ADC reset asserted or unconfigured	11.0 to 12.4	11.0 to 12.4	V
	Analog input (+16 V to +2 V prescaler range)	0.4 to 12.4	0.4 to 12.4	V
	Analog input (+1 V to +0.125 V prescaler range)	0.4 to 3.75	0.4 to 3.75	V
	Analog input (16 V to 2 V prescaler range)	11.0 to 0.4	11.0 to 0.4	V
	Analog input (1 V to 0.125 V prescaler range)	3.75 to 0.4	3.75 to 0.4	V
	Analog input (direct input to ADC)	0.4 to 3.75	0.4 to 3.75	V
	Digital input	11.0 to 12.6	0.4 to 12.4	V
AG	Unpowered, ADC reset asserted or unconfigured	11.0 to 12.6	11.0 to 12.4	V
	Low Current Mode (1 A, 3 A, 10 A, 30 A)	0.4 to 12.6	0.4 to 12.4	V
	Low Current Mode (1 A, 3 A, 10 A,30A)	11.0 to 0.4	11.0 to 0.4	V
	High Current Mode3	11.0 to 12.6	11.0 to 12.4	V
AT	Unpowered, ADC reset asserted or unconfigured	0.4 to 16.5	0.4 to 16.0	V
	Analog input (+16 V, 4 V prescaler range)	0.4 to 16.5	0.4 to 16.0	V
	Analog input (direct input to ADC)	0.4 to 3.75	0.4 to 3.75	V
	Digital input	0.4 to 16.5	0.4 to 16.0	V
TSTG3	Storage temperature	65 to +150
Tj3	Junction temperature	+125

Notes:
1. The device should be operated within the limits specified by the datasheet. During transitions, the input
signal may undershoot or overshoot according to the limits shown in Table 3-4 on page 3-4.
2. Analog data not valid beyond 3.65 V.
3. For flash programming and retention maximum limits, refer to Table 3-5 on page 3-5. For recommended operating limits refer to Table 3-2 on page 3-3.