W39V040C

Features: • Single 3.3-volt operations: − 3.3-volt Read − 3.3-volt Erase − 3.3-volt Program• Fast Program operation: − Byte-by-Byte programming: 7 S (typ.) (VPP = 12V)− Byte-by-Byte programming: 10 S (typ.)(VPP = Vcc)• Fast Erase operation:− Se...

product image

W39V040C Picture
SeekIC No. : 004544614 Detail

W39V040C: Features: • Single 3.3-volt operations: − 3.3-volt Read − 3.3-volt Erase − 3.3-volt Program• Fast Program operation: − Byte-by-Byte programming: 7 S (typ.) (VPP =...

floor Price/Ceiling Price

Part Number:
W39V040C
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/15

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Single 3.3-volt operations:
− 3.3-volt Read
− 3.3-volt Erase
− 3.3-volt Program
• Fast Program operation:
− Byte-by-Byte programming: 7 S (typ.) (VPP = 12V)
   − Byte-by-Byte programming: 10 S (typ.)(VPP = Vcc)
• Fast Erase operation:
   − Sector erase 0.6 Sec. (typ.)
   − Page erase 0.3 Sec. (typ.)
• Fast Read access time: Tkq 11 nS
• Endurance: 50K cycles (typ.)
• Twenty-year data retention
• 6 Even sectors with 64K bytes and 16 Even pages with 8K bytes or 8 Even sectors with 64 Kbytes
• Any individual sector can be erasedHardware protection:
   − #TBL supports 64-Kbyte Boot Block hardware protection
   − #WP supports the whole chip except Boot Block hardware protection
• Low power consumption
−Active current: 15 mA (typ. for LPC read mode)
• Automatic program and erase timing with internal VPP generation
• End of program or erase detection
− Toggle bit
− Data polling
• Latched address and data
• TTL compatible I/O
• Available packages: 32L PLCC, 32L STSOP 32L PLCC Lead free, 32L STSOP Lead free



Pinout

  Connection Diagram


Specifications

PARAMETER
RATING
UNIT

Operating Temperature

0 to +70
Storage Temperature
-65 to +150
Power Supply Voltage to VSS Potential
-0.5 to +4.0
V
D.C. Voltage on Any Pin to Ground Potential
-0.5 to VDD +0.5
V
VPP Voltage
-0.5 to +13
V
Transient Voltage (<20 nS) on Any Pin to Ground Potential
-1.0 to VDD +0.5
V
Note: Exposure to conditions beyond those listed under Absolute Maximum Ratings May adversely affect the
          life and reliability of the device.


Description

The W39V040C is a 4-megabit, 3.3-volt only CMOS flash memory organized as 512K × 8 bits. For flexible erase capability, the 4Mbits of data are divided into into 16 x 8 Kbytes pages and 6 x 64 Kbytes sectors or 8 x 64 Kbytes sectors. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is required for accelerated program. The unique cell architecture of the W39V040C results in fast program/erase operations with extremely low current consumption. This device can operate at two modes, Programmer bus interface mode, Low pin count (LPC) bus interface mode. As in the Programmer interface mode, it acts like the traditional flash but with a multiplexed address inputs. But in the LPC interface mode, this device complies with the Intel LPC specification. The device can also be programmed and erased using standard EPROM programmers.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Memory Cards, Modules
Potentiometers, Variable Resistors
Optical Inspection Equipment
Sensors, Transducers
Batteries, Chargers, Holders
View more