XC2C128

Features: • Optimized for 1.8V systems - Industry's fastest low power CPLD - Static Icc of less than 100 microamps at all times - Densities from 32 to 512 macrocells• Industry's best 0.18 micron CMOS CPLD - Optimized architecture for effective logic synthesis - Multi-voltage I/O operat...

product image

XC2C128 Picture
SeekIC No. : 004547790 Detail

XC2C128: Features: • Optimized for 1.8V systems - Industry's fastest low power CPLD - Static Icc of less than 100 microamps at all times - Densities from 32 to 512 macrocells• Industry's best 0.1...

floor Price/Ceiling Price

Part Number:
XC2C128
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/3/27

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Optimized for 1.8V systems
  - Industry's fastest low power CPLD
  - Static Icc of less than 100 microamps at all times
  - Densities from 32 to 512 macrocells
• Industry's best 0.18 micron CMOS CPLD
  - Optimized architecture for effective logic synthesis
  - Multi-voltage I/O operation - 1.5V to 3.3V
• Advanced system features
  - Fastest in system programming
    ` 1.8V ISP using IEEE 1532 (JTAG) interface
  - On-The-Fly Reconfiguration (OTF)
  - IEEE1149.1 JTAG Boundary Scan Test
  - Optional Schmitt trigger input (per pin)
  - Unsurpassed low power management
  - FZP 100% CMOS product term generation
  - DataGATE external signal control
  - Flexible clocking modes
    ` Optional DualEDGE triggered registers
    ` Clock divider (÷ 2,4,6,8,10,12,14,16)
    ` CoolCLOCK
  - Global signal options with macrocell control
    ` Multiple global clocks with phase selection per macrocell
    ` Multiple global output enables
    ` Global set/reset
  - Abundant product term clocks, output enables and set/resets
  - Efficient control term clocks, output enables and set/resets for each macrocell and shared across function blocks
  - Advanced design security
  - Open-drain output option for Wired-OR and LED drive
  - Optional bus-hold or weak pullup on select I/O pins
  - Optional configurable grounds on unused I/Os
  - Mixed I/O voltages compatible with 1.5V, 1.8V, 2.5V, and 3.3V logic levels on all parts
    ` SSTL2-1,SSTL3-1, and HSTL-1 on 128 macrocell and denser devices
  - PLA architecture
    ` Superior pinout retention
    ` 100% product term routability across function block
  - Hot pluggable
  - Wide package availability including fine pitch:
    ` Chip Scale Package (CSP) BGA, Fine Line BGA, TQFP, PQFP, VQFP, and PLCC packages
  - Design entry/verification using Xilinx and industry standard CAE tools
  - Free software support for all densities using Xilinx WebPACK™ or WebFITTER™ tools
  - Industry leading nonvolatile 0.18 micron CMOS  process
  - Guaranteed 1,000 program/erase cycles
  - Guaranteed 20 year data retention



Specifications

Symbol Parameter Min. Max. Unit
VCC Supply voltage(2) relative to GND 0.5 2.0 V
VI Input voltage(3) relative to GND 0.5 4.0 V
TJ Maximum junction temperature 40 150 °C
TSTR Storage temperature 65 150 °C
Notes:
1. Stresses above those listed may cause malfunction or permanent damage to the device. This is a stress rating only. Functional operation at these or any other condition above those indicated in the operational and programming specification is not implied.
2. The chip supply voltage should rise monotonically.
3. Maximum DC undershoot below GND must be limited to either 0.5V or 10 mA, whichever is easier to achieve. During transitions, the device pins may undershoot to 2.0V or overshoot to 4.5 V, provided this over- or undershoot lasts less than 10 ns and with the forcing current being limited to 200 mA. The I/O voltage may never exceed 4.0V.



Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Soldering, Desoldering, Rework Products
Cables, Wires - Management
Circuit Protection
Isolators
Discrete Semiconductor Products
View more