Position: Home  > All Categories> Integrated Circuits (ICs) > Z86108

Z86108

Features: ` 18-Pin DIP and SOIC Packages` 3.0V to 5.5V Operating Range` Available Temperature Ranges E = 40°C to +105°C S = 0°C to +70°C` 14 Input / Output Lines` Six Vectored, Prioritized Interrupts from Six Different Sources` Two On-Board Comparators` Two Programmable 8-Bit Counter/Timers, Each ...

product image

Z86108 Picture
See larger image
SeekIC No. : 004550275 Detail

Z86108: Features: ` 18-Pin DIP and SOIC Packages` 3.0V to 5.5V Operating Range` Available Temperature Ranges E = 40°C to +105°C S = 0°C to +70°C` 14 Input / Output Lines` Six Vectored, Prioritized Interrupt...

Z86108 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
Z86108
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/27

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

` 18-Pin DIP and SOIC Packages
` 3.0V to 5.5V Operating Range
` Available Temperature Ranges
E = 40°C to +105°C
S = 0°C to +70°C
` 14 Input / Output Lines
` Six Vectored, Prioritized Interrupts from Six Different Sources
` Two On-Board Comparators
` Two Programmable 8-Bit Counter/Timers, Each with 6-Bit Programmable Prescaler
` Clock-Free WDT Reset
` Power-On Reset (POR) Timer
` ROM Mask Options:
System Clock Divisor
ROM Protect
Auto Latch
Permanent Watch-Dog Timer (WDT)
RC Oscillator
32 kHz Operation
` On-Chip Oscillator that Accepts RC, Crystal, Ceramic Resonator, LC, or External Clock Drive
` Low-Power Consumption (50 mw)
` Fast Instruction Pointer (1.5 s @ 4 MHz)
` Fourteen Digital Inputs at CMOS Levels; Schmitt-Triggered
` Software Enabled Watch-Dog Timer
` Programmable Interrupt Polarity
` Two Standby Modes: STOP and HALT
` Low-Voltage Protection 18-Pin DIP and SOIC Packages
` 3.0V to 5.5V Operating Range
` Available Temperature Ranges
E = 40°C to +105°C
S = 0°C to +70°C
` 14 Input / Output Lines
` Six Vectored, Prioritized Interrupts from Six Different Sources
` Two On-Board Comparators
` Two Programmable 8-Bit Counter/Timers, Each with 6-Bit Programmable Prescaler
` Clock-Free WDT Reset
` Power-On Reset (POR) Timer
` ROM Mask Options:
System Clock Divisor
ROM Protect
Auto Latch
Permanent Watch-Dog Timer (WDT)
RC Oscillator
32 kHz Operation
` On-Chip Oscillator that Accepts RC, Crystal, Ceramic Resonator, LC, or External Clock Drive
` Low-Power Consumption (50 mw)
` Fast Instruction Pointer (1.5 ms @ 4 MHz)
` Fourteen Digital Inputs at CMOS Levels; Schmitt-Triggered
` Software Enabled Watch-Dog Timer
` Programmable Interrupt Polarity
` Two Standby Modes: STOP and HALT
` Low-Voltage Protection


Pinout

Connection Diagram


Specifications

Parameter
Min
Max
Units
Notes
Ambient Temperature under Bias
40
+105
C
Storage Temperature
65
+150
C
Voltage on any Pin with Respect to VSS
0.7
+12
V
1
Voltage on VDD Pin with Respect to VSS
0.3
+7
V
Voltage on Pin 7 with Respect to VSS
0.7
V DD

+1
V
2
Total Power Dissipation
462
mW
Maximum Current out of VSS
84
mA
Maximum Current into VDD
84
mA
Maximum Current into an Input Pin
600
+600
A
3
Maximum Current into an Open-Drain Pin
600
+600
A
4
Maximum Output Current Sinked by Any I/O Pin
12
mA
Maximum Output Current Sourced by Any I/O Pin
12
mA
Total Maximum Output Current Sinked by Port 2
70
mA
Total Maximum Output Current Sourced by Port 2
70
mA
Notes:
1. This applies to all pins except where otherwise noted. Maximum current into pin must be ±600A.
2. There is no input protection diode from pin to V DD
3. This excludes Pin 6 and Pin 7.
4. Device pin is not at an output Low state.

Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This rating is a stress rating only. Functional operation of the device at any condition above those indicated in the operational sections of these specifications is not implied. Exposure to absolute maximum rating conditions for an extended period may affect device reliability.

Total Power dissipation = VDD x [IDD (sum of IOH)]
+ sum of [(VDD VOH) x IOH]
+ sum of (VOL x IOL).


Description

ZiLOG's Z86108 is a member of the Z8® MCU family, offering easy software/hardware system expansion
.
For applications demanding powerful I/O capabilities, the Z86108's dedicated input and output lines are grouped into three ports. Each port is configurable under software control to provide timing, status signals, or parallel I/O.

Two on-chip counter/timers, with a large number of user selectable modes, off-load the system of administering realtime tasks such as counting/timing and I/O data communications. Additionally, two on-board comparators process analog signals with a common reference voltage (Figure 1).Note of Z86108: All Signals with an overline, "-", are active Low. For example, B/W, in which WORD is active Low), and B/W, in which BYTE is active Low.

 


Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Capacitors
GRM188R71H103KA01D
GRM21BR71H104KA01L
Optical Inspection Equipment
AA924
A21K4B
Static Control, ESD, Clean Room Products
DPA5
PA800-A41
Audio Products
HUC1002
WM-64CT
Crystals and Oscillators
WT325BI0030.000000
2SB49
Semiconductor Modules
2DI300A-050-03
7MBR25SA-120-50
View more