Z86L08

Notes:
Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of  the device at any condition above those indicated in the operational sections of these specifications is not implied.

Exposure to absolute maximum rating conditions for an extended period may affect device reliability.

Total power dissipation should not exceed 462 mW for the package. Power dissipation is calculated as follows:
1. This applies to all pins except where otherwise noted.
2. Maximum current into pin must be ±600mA. There is no input protection diode from pin to V_DD.
3. This excludes Pin 6 and Pin 7.
4. Device pin is not at an output Low state.
Total Power dissipation = VDD x [IDD (sum of IOH)] + sum of [(VDD VOH) x IOH] + sum of (V0L x I0L)

Zilog's Z86L04/L08 microcontrollers (MCUs) are members of the Z8 single-chip MCU family, which offer easy software/ hardware system expansion.

For applications of Z86L04/L08  demanding powerful I/O capabilities, the MCU's dedicated input and output lines are grouped into three ports, and are configurable under software control to provide timing, status signals, or parallel I/O.One on-chip counter/timer, with a large number of user-selectable modes, off-load the system of administering realtime tasks such as counting/timing and I/O data communications.Additionally, two on-board comparators process analog signals with a common reference voltage (Figure 1).