ZNBG3113Q20TC

Transistor Polarity :
Drain-Source Breakdown Voltage :
Gate-Source Breakdown Voltage :
Continuous Drain Current :
Resistance Drain-Source RDS (on) :
Configuration :
Maximum Operating Temperature :
Mounting Style :
Package / Case :
Packaging : Reel


Pinout




Description

The ZNBG3113Q20TC is designed as one member of the ZNBG series which are to meet the bias requirements of GaAs and HEMT FETs commonly used in satellite receiver LNBs, PMR cellular telephones etc. with a minimum of external components.

ZNBG3113Q20TC has many features. (1)Provides bias for GaAs and HEMT FETs. (2)Drives up to three FETs. (3)Dynamic FET protection. (4)Drain current set by external resistor. (5)Regulated negative rail generator requires only 2 external capacitors. (6)Choice in drain voltage. (7)Wide supply voltage range. (8)Polarisation switch for LNBs. (9)22KHz tone detection for band switching. (10)Programmable tone delay. (11)Compliant with ASTRA control specifications. (12)QSOP surface mount package. Those are all the main features.

Some absolute maximum ratings of ZNBG3113Q20TC have been concluded into several points as follow. (1)Its supply voltage would be from -0.6V to 12V. (2)Its supply current would be 100mA. (3)Its input voltage would be 25V continuous. (4)Its drain current per FET would be 0 to 15mA. (5)ts operating temperature range would be from -40°C to 70°C. (6)Its storage temperature range would be from -50°C to 85°C. (7)Its power dissipation would be 500mW. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of ZNBG3113Q20TC are concluded as follow. (1)Its supply voltage would be min 5V and max 10V. (2)Its supply current would be max 15mA at Id1 to Id3=0 and would be max 35mA at Id1=0, Id2 to Id3=10mA and Vpol=14V and would be max 45mA at Id1 to Id3=0, Ilb=10mA. (3)Its substrate voltage would be min -3.5V and typ -3.0V and max -2.5V. (4)Its output noise drain voltage would be max 0.02Vpkpk and gate voltage would be max 0.005Vpkpk. (5)Its oscillator frequency would be min 20KHz and typ 350KHz and max 800KHz. And so on. If you have any question or suggestion or want to know more information of ZNBG3113Q20TC please contact us for details. Thank you!