Features: • 3dB Bandwidth 300MHz
• Slew rate 450V/s
• Differential gain 0.01%
• Differential phase 0.04°
• Output current 40mA
• Stable up to 100pF load
• ±5 Volt supply
• Supply current 19mA
• 16 pin SO packageApplication• Video routing and switching
• CCTV switching
• Video distribution selection
• RGB multiplexing
• High frequency instrumentation Data acquisition
• Data acquisitionPinout
SpecificationsSupply voltage VCC -0.5V to +6V
Supply voltage VEE -6V to +0.5V
Analog inputs to ground VEE -0.5V to VCC +0.5V
Digital inputs to ground -0.5V to VCC +0.5V
Outputs to ground* VEE -0.5V to VCC +0.5V
Output current, max continous 40mA
Operating Ambient Temperature Range -40 to 85 Storage -65 to 150
Operating Junction temperature TJMAX 150**
**The thermal resistance from the semiconductor die to ambient is typically 120/W when the SO16 package is mounted on a PCB in free air. The power dissipation of the device when loaded must be designed to keep the device junction temperature below TJMAX.
*During power-up and power-down, these voltage ratings require an appropriate sequence of applying and removing signals and power supplies.
DescriptionThe ZXFV301 is a 4:1 high speed analog switch designed for use as a buffered video multiplexer and other high-speed applications.
It features low different gain and phase distortion. The high speed high output current capability provides 75 cable drive for use in high performance video applications.
The input channel is selected by means of four logic lines. An output enable line allows expansion to eight channels using two devices ZXFV301 as shown in the example application figure 1.
An alternative device, ZXFV302 has a seperate datasheet and provides the same functionality and pin-out as the ZXFV301 but with only two logic lines controlling the switch via a decoder.
ZXFV301 Data Sheet
