BTS7741G

Number of Switches :
Switch Configuration :
On Resistance (Max) :
Crosstalk :
Bandwidth :
On Time (Max) :
Off Time (Max) :
Switch Voltage (Max) :
Mounting Style : SMD/SMT
Maximum Operating Temperature : + 150 C
Operating Supply Voltage : 1.8 V to 42 V
Package / Case : PDSO-28


Features:

Quad D-MOS switch driver
Free configurable as bridge or quad-switch
Optimized for DC motor management application
110m high-side switch, 100m l
Low R_DSONside switch (typical values @25°C)
Maximum peak current: typ. 10 A @ 25°C
Very low quiescent current: typ. 5 A @ 25° C
Small outline, enhanced power P-DSO-package
Full short-circuit-protection
Operates up to 40 V
Status flag diagnosis
Overtemperature shut down with hysteresis
Internal clamp diodes
Open load detection in Off-mode
Under-voltage detection with hysteresis
PWM frequencies up to 1 kHz
  


Description

    The BTS7741G is part of the TrilithIC  family containing three dies in one package: One double high-side switch and two low-side switches. The drains of these three vertical DMOS chips are mounted on separated lead frames. The sources are connected to individual pins, so the BTS7741G can be used in H-bridge- as well as in any other configuration. Both the double high-side and the two low-side switches of the BTS7741G are manufactured in SMART SIPMOS  technology which combines low R  vertical DMOS power stages with CMOS control circuitry.

   The high-side switch BTS7741G is DSON fully protected and contains the control and diagnosis circuitry. Also the low-side switches are fully protected, the equivalent standard product is the BSP77. In contrast to the  BTS7740G, the  BTS7741G offers an open load in Off-mode detection and slightly increased current limitation.

Parameters:

Technical/Catalog Information	BTS7741G
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Applications	DC Motor Controller
Number of Outputs	1
Voltage - Supply	1.8 V ~ 42 V
Voltage - Load	-
Current - Output	10A
Operating Temperature	-40°C ~ 150°C
Package / Case	DSO-28
Packaging	Tape & Reel (TR)
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	BTS7741G BTS7741G