Features: · TYPICAL DROPOUT 1.3V AT 1.5A· THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V, 1.8V, 2.5V, 2.85V, 3.3V,3.6V,5V,8V,9V,12V.· GUARANTEED OUTPUT CURRENT UP TO 1.5A· OUPUT TOLERANCE ±1% AT 25°C AND ±2% IN FULL TEMPERATURE RANGE· INTERNAL POWER AND THERMAL LIMIT· WIDE OPERATING TEMPER...
LD1086D2M15: Features: · TYPICAL DROPOUT 1.3V AT 1.5A· THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V, 1.8V, 2.5V, 2.85V, 3.3V,3.6V,5V,8V,9V,12V.· GUARANTEED OUTPUT CURRENT UP TO 1.5A· OUPUT TOLERANCE ±1...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter² | Value | Unit |
VI | DC Input Voltage | 30 | V |
IO | Output Current | Internally Limited | mA |
PD | Power Dissipation | Internally Limited | mW |
Tstg | Storage Temperature Range | -55 to +150 | |
Top | Operating Junction Temperature Range | -40 to +125 |
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.
The LD1086D2M15 is a LOW DROP Voltage Regulator able to provide up to 1.5A of Output Current. Dropout is guaranteed at a maximum of 1.5V at the maximum output current, decreasing at lower loads. The LD1086D2M15 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance .
A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1086D2M15 quiescent current flows into the load, so increase efficiency. Only a 10µF minimum capacitor is need for stability. The LD1086D2M15 is supplied in TO-220, D2PAK, D2PAK/A andDPAK.Onchiptrimmingallowstheregulator to reach a very tight output voltage tolerance,within ±1% at 25°C.