Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The HIP4081 is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4081 can drive every possible switch combination except those which would cause a shoot-through condition. The HIP4081 can switch at frequencies up to 1MHz andssssss is well suited to driving Voice Coil Motors, high-frequency Class D audio amplifiers, and power supplies.
For example, the HIP4081 can drive medium voltage brush motors, and two HIP4081s can be used to drive high performance stepper motors, since the short minimum "on-time" can provide fine micro-stepping capability.
Short propagation delays of approximately 55ns maximizes control loop crossover frequencies and dead-times which can be adjusted to near zero to minimize distortion, resulting in rapid, precise control of the driven load. A similar part, the HIP4080, includes an on-chip input comparator to create a PWM signal from an external triangle wave and to facilitate "hysteresis mode" switching.
See Application Note AN9325 for HIP4081, Intersil Answer- FAX, (407) 724-7800, document #99325. Intersil web home page: http://www.semi.intersil.com Similar part HIP4081A includes undervoltage circuitry which does not require the circuitry shown in Figure 30 of this data sheet.
HIP4081 Maximum Ratings
Supply Voltage, VDD and VCC . . . . . . . . . . . . . .. . . . . . -0.3V to 16V Logic I/O Voltages . . . . . . . . . . . . . . . . . . . . . . .-0.3V to VDD +0.3V Voltage on AHS, BHS. . . . -6.0V (Transient) to 80V (25 to 125) Voltage on AHS, BHS. . . .. -6.0V (Transient) to 70V (-55 to 125) Voltage on ALS, BLS . . . . . . .-2.0V (Transient) to +2.0V (Transient) Voltage on AHB, BHB. . . . . . . . .VAHS, BHS -0.3V to VAHS, BHS +16V Voltage on ALO, BLO . . . . . . .. . . . . . . VALS, BLS -0.3V to VCC +0.3V Voltage on AHO, BHO . . . . . . .VAHS, BHS -0.3V to VAHB, BHB +0.3V Input Current, HDEL and LDEL . . . . .. . . . . . . . . . . . . . -5mA to 0mA Phase Slew Rate . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 20V/ns
HIP4081 Features
• Independently Drives 4 N-Channel FET in Half Bridge or Full Bridge Configurations • Bootstrap Supply Max Voltage to 95VDC • Drives 1000pF Load at 1MHz in Free Air at 50oC with Rise and Fall Times of Typically 10ns • User-Programmable Dead Time • On-Chip Charge-Pump and Bootstrap Upper Bias Supplies • DIS (Disable) Overrides Input Control • Input Logic Thresholds Compatible with 5V to 15V Logic Levels • Very Low Power Consumption
HIP4081 Typical Application
• Medium/Large Voice Coil Motors • Full Bridge Power Supplies • Class D Audio Power Amplifiers • High Performance Motor Controls • Noise Cancellation Systems • Battery Powered Vehicles • Peripherals • U.P.S.