Position: Home > DataSheet > Index S > STE Series > STEL-2120/CM, STEL-2130, STEL-2176

Low Cost Custom Prototype PCB Manufacturer

STEL-2120/CM, STEL-2130, STEL-2176

Table of contents:
Info of STEL-2120/CM
Info of STEL-2130
Info of STEL-2176

STEL-2120/CM, STEL-2130, STEL-2176 Selling Leads, Datasheet

MFG:STEL Package Cooled:PLCC68 D/C:0040

STEL-2120/CM, STEL-2130, STEL-2176 Picture

STEL-2120/CM, STEL-2130, STEL-2176 Datasheet download

Five Points

Part Number: STEL-2120/CM

MFG: STEL

Package Cooled: PLCC68

D/C: 0040

Attentive hint

Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.

How to buy ?

How long will receive a response.

Top Sellers:

TOP

STEL-2176 General Description

The STEL-2176 is a complete subscriber-side cable modem ASIC which integrates both the downstream receiver and upstream transmitter functions. The receiver includes a high performance 10-bit Analog-to- Digital Converter (ADC) with a direct Intermediate Frequency (IF) interface. The receiver also includes a QAM demodulator and both ITU-T (J.83) Annex A and Annex B Forward Error Correction (FEC). The upstream transmitter includes a BPSK/QPSK/16QAM modulator with highly flexible FEC and scrambling, and a 10-bit low spurious digital to analog converter (DAC) for direct synthesis of an upstream 5 to 65 MHz signal. Both the receiver and transmitter are highly flexible and programmable; the STEL-2176 Digital Mod/Demod ASIC offers a solution to meet current and evolving standards.

The input to the STEL-2176 receiver is an analog IF signal of up to 50 MHz. Typically, the IF signal has 44 MHz center frequency with a 6 MHz bandwidth for NTSC based systems, or a 36 MHz center frequency with an 8 MHz bandwidth for PAL based systems. In typical applications, the input signal is sampled by the ADC at approximately 25 MHz for the 44 MHz IF, or at approximately 29 MHz for the 36 MHz IF This type of sub-sampling technique works by intentionally undersampling the carrier frequency so that aliased signal appears at a lower frequency. The sampling rate is still high enough to capture all of the modulation bandwidth without distortion. In the case of a 44 MHz IF and a 25 MHz clock, the resulting digital signal is centered at 6 MHz. In the case of a 36 MHz IF and 29 MHz clock, the resulting digital signal is centered at 7 MHz. For more information on subsampling techniques, please see Stanford Telecom Application Note A-117.

The digital samples from the ADC are downconverted to baseband I and Q signals in the Digital Down Converter (DDC) block. Since the RF tuner sections of a cable modem may have large frequency errors, an Automatic Frequency Control (AFC) block is used in the STEL-2176 for coarse tuning of the DDC. This allows rapid acquisition of the input signal even with frequency errors of ±200 kHz. Fine tuning of the DDC is done using a carrier Phase-Lock Loop (PLL).

An Automatic Gain Control (AGC) function provides two output signals to adjust the RF and IF analog gain stages of circuitry external to the STEL-2176, so that the ADC input is in the optimal range. The two outputs can be programmed to create a sequential AGC system which maximizes RF gain for improved receiver noise figure. The two AGC outputs and the external gain adjust blocks work together to maximize ADC performance, but when large adjacent channels are present, the power of the desired signal may change. A second digital AGC tracks and adjusts the level of the desired signal after the adjacent channel energy is removed by filtering.

Following the DDC, a square root raised cosine Nyquist filter eliminates adjacent channel signals, and performs matched filtering to eliminate intersymbol interference. The filter excess bandwidth or alpha is programmable from 0.12 to 0.20. The Timing Recovery block finds the exact location in the center of each symbol using a special low-jitter discriminator. These values are fed to the Adaptive Channel Equalizer.

An Adaptive Channel Equalizer (ACE) compensates for any multipath distortion on the input signal introduced in the channel. The equalizer uses one sample per symbol (T spaced taps). The output of the equalizer is baseband I and Q signals with carrier frequency and phase errors, symbol timing errors, gain errors, andmultipath effects removed.

The Demapper takes the baseband I and Q signalsrepresenting the QAM symbols, and translates each symbol back into a series of binary values based on oneof the selectable constellation maps.

Following the Demapper is the Forward Error Correction (FEC) system. This programmable system supports both the ITU-T (J.83) Annex A (see page 14) and Annex B (see page 16) standards. In general, bothFEC systems employ Reed Solomon Decoders, Frame Sync circuits that determine the FEC code block boundaries, and a De-Interleaver. Interleaving is used in the FEC standards to improve performance when the channel contains bursty noise. Since the transmitter Interleaver spreads the data over a large time, when the receiver performs the matched operation to the Interleaver in order to bring the data back into the correct time sequence, any burst errors appear to be spread out in time. This helps makes these errors correctable by the FEC. The STEL-2176 internal memory
can support all MCNS Interleaver configurations. For deeper interleaving, a direct interface to external memory is provided.

The output of the receiver is typically arranged asMPEG-2 frames, although the MPEG-2 framing can be by-passed for ATM applications. The output can be 8- bit parallel with a byte clock or serial with a bit clock. The data can be output in a smooth fashion without inter-frame gaps or with the pauses in output data caused by the FEC system passed through to the output (see Receiver Timing discussion).

STEL-2176 Maximum Ratings

Symbol	Parameter	Range	Units ^{Note 1}
T_stg	Storage Temperature	-40 to +125	°C
V_DDmax	Supply voltage on V_DD	-0.3 to +4.6	volts
AV_DDmax	Supply voltage on AV_DD	-0.3 to +4.6	volts
5V_DDmax	Supply voltage on 5V_DD	-0.3 to +7.0	volts ^{Note 2}
AV_SS	Analog supply return for AV_DD	±10% of V_DD	volts
V_I(max)	Input voltage	-0.3 to 5V_DD+0.3	volts
I_i	DC input current	± 30	mA
P_{Diss (max)}	Power dissipation	1500	mW

Note:
All voltages are referenced to V_SS.
5V_DD must be greater than or equal to V_SS. This rule can be violated for a maximum of 100 msec
during power up.

STEL-2176 Features

RECEIVER
` 10-bit A/D on chip
` 16/64/256 QAM demodulation
` Selectable ITU-T (J.83), Annex A/Annex B forward error correction (FEC)
` MCNS, IEEE 802.14 (preliminary), DAVIC/DVB compliant
` Parallel or serial output data with or without gaps
` Viterbi decoder for Annex B
` Selectable Reed-Solomon decoder for Annex A and Annex B
` Programmable De-Interleaver
` Programmable De-Randomizer
` MPEG-2 Framing
` Programmable control registers for maximum flexibility
` FIFO for optional removal of inter-frame gaps
` Automatic frequency control (± 200 kHz)
` Highly integrated receiver functions
` Up to 50 MHz IF input
` Uses inexpensive Crystal in the 25 MHz range
` Adaptive Channel Equalizer (ACE) to compensate for channel distortion
` Selectable Nyquist filter
` Fast acquisition

TRANSMITTER
` Patented (U.S. Patent #5,412,352) Complete BPSK/QPSK/16QAM modulator
` Complete upstream modulator solution-serial data in, RF signal out
` Programmable over a wide range of data rates
` Numerically Controlled Oscillator (NCO) modulator provides fine frequency resolution
` Carrier frequencies programmable from 5 to 65 MHz
` Uses inexpensive crystal in 25 MHz range
` Operates in continuous and burst modes
` Differential Encoder, Programmable Scrambler, and Programmable Reed- Solomon FEC Encoder
` Programmable 64-tap FIR filter for signal shaping before modulation
` 10-bit DAC on chip
` Compatible with DAVIC, IEEE 802.14 (preliminary), Intelsat IESS-308, MCNS Standards
` Supports low data rates for voice applications and high data rates for wideband applications

Hotspot Suppliers Product

Product List A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

MT58L64L18CT-10

Price: 4-6 USD

MT58L64L18CT-10 TQFP100
DL-7140-211M

Price: 5-6.5 USD

DL-7140-211M laser tube
74LVC74APG

Price: 4-5 USD

74LVC74APG - IC FLIP FLOP D-Type POS-EDG DUAL 14TSSOP
CY28346ZI-2

Price: 6.5-8 USD

CYPRESS - Clock Synthesizer with Differential CPU Outputs
PI5V330QEX

Price: 0.284-0.286 USD

PI5V330QEX Pericom Multiplexer Switch ICs
BSM300GA120DN2

Price: 1-2 USD

IGBT power module, Single switch, 1200 V, Collector-emitter voltage, 430A
SVA150XG04TB

Price: 1-2 USD

a-Si TFT-LCD, NEC, 228.096Hmm, 560V
PC354N1

Price: 0.124-0.2 USD

PC354N1T - Mini-flat Package, AC Input Type Photocoupler - Sharp Electrionic Components
RL1210JR-070R22L

Price: 0.177-0.178 USD

RL1210JR51-XX-BL - Thick Film Chip Resistor Low Ohmic - TAITRON Components Incorporated
STPS140A

Price: 0.053-0.055 USD

STPS140A - POWER SCHOTTKY RECTIFIER - STMicroelectronics
STA013

Price: 1.45-1.5 USD

STA013 - MPEG 2.5 LAYER III AUDIO DECODER - STMicroelectronics
SMBJ5347B

Price: 0.073-0.075 USD

SMBJ5347B - 5 Watt Surface Mount Silicon Zener Diodes - Micro Commercial Components