Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The STLC5048 is a monolithic fully programmable 4 channel CODEC and filter. It operates with a single +3.3V supply.
The analog interface is based on a receive output buffer driving the SLIC RX input and on an amplifier input stage normally driven by the SLIC TX output.Due to the single supply voltage a midsupply reference level is generated internally by the device and all analog signals are referred to this level (AGND).The PCM interface uses one common 8KHz frame sync. pulse for transmit and receive direction. The bit clock is automatically detected between four standards:1.563/1.544MHz, 2.048MHz, 4.096MHz,8192MHz.
Two PCM port are provided: the channels can be connected to port A or/and B.
Device programmability is achieved by means of several registers and commands allowing to set the different parameters like TX/RX gains, line impedance,transhybrid balance, equalization (frequency response), encoding law (A/m), time slot assignment,independent channels power up/down, loopbacks,PCM bits offset.
The STLC5048 can be programmed via serial interface running up to 8 MHz. One interrupt output pin is also provided.
A GUI interface is also available to emulate and program the coefficients for impedance synthesis, echo cancelling and channel filtering.
STLC5048 Maximum Ratings
Symbol
Parameter
Value
Unit
VCC
VCC to VEE
4.6
V
VDD
VDD to VSS
4.6
V
VDIN
Digital Input Pin Voltage
5.5
V
VAin
Analog Input Pin Voltage(VDD=VCC; VEE=VSUB)
VCC + 0.5; VEE - 0.5
V
TSTG
Storage Temperature Range
-65 to +150
TLEAD
Lead Temperature (soldering, 10s)
300
STLC5048 Features
FULLY PROGRAMMABLE MONOLITHIC 4 CHANNEL CODEC/FILTER SINGLE +3.3V SUPPLY A/m LAW PROGRAMMABLE LINEAR CODING (16 BITS) OPTION PCM HIGHWAY FORMAT AUTOMATICALLY DETECTED:1.536 or 1.544 MHz2.048, 4.096,8192 MHz TWO PCM PORTS AVAILABLE TX GAIN PROGRAMMING: 33dB RANGE;<0.01dB STEP RX GAIN PROGRAMMING:42dB RANGE;<0.01dB STEP PROGRAMMABLE SLIC INPUT IMPEDANCE PROGRAMMABLE TRANSHYBRID BALANCE FILTER PROGRAMMABLE EQUALIZATION (FREQUENCY RESPONSE) PROGRAMMABLE TIME SLOT ASSIGNMENT DIGITAL AND ANALOG LOOPBACKS SLIC CONTROL PORTSTATIC (16 I/Os)DYNAMIC (12 I/Os + 4 CS) BUILT-IN TEST MODE WITH TONE GENERATION, MCU ACCESS TO PCM DATA 64 TQFP (10X10mm) PACKAGE PROGRAMMABLE SLIC LINE CURRENT LIMITATION PROGRAMMABLE SLIC OFF-HOOK DETECTION THRESHOLD