© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The GS431B is 3-terminal adjustable precision shunt regulator with guaranteed temperature stability over the applicable extended commercial temperature range.
Features of the GS431B are:(1)sink current capability: 200mA...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The GS421SD is designed for low power rectification
Vendor:Other Category:Other
The GS420SD is designed for low power rectification.
Vendor:Other Category:Other
Vendor:Other Category:Other
The GS400SD is high frequency rectification for switching power supply.
Vendor:Other Category:Other
Vendor:Other Category:Other
The GS411SD is designed for low power rectification.
Vendor:Other Category:Other
The GS3T5-5.2 is a 3.12W DC-DC converter designed to provide an isolated 5.2V/600mA power source.The GS3T5-5.2 operates from a 5V input source and features continuous short-circuit protection.
Mfg:ST Pack:module D/C:N/A Vendor:Other Category:Other
The GS3T5-5.2 is a 3.12W DC-DC converter designed to provide an isolated 5.2V/600mA power source.The GS3T5-5.2 operates from a 5V input source and features continuous short-circuit protection.
Vendor:Other Category:Other
The GS3T5-3.3 is a 2.5W DC-DC converter designed to provide an isolated 3.3V/750mA power source.The GS3T5-3.3 operates from a 5V input source and features continuous short-circuit protection.
Vendor:Other Category:Other
The GS882Z818/36B is an 8Mbit Synchronous Static SRAM. GSI's NBT SRAMs, like ZBT, NtRAM, NoBL or other pipelined read/double late write or flow through read/single late write SRAMs, allow utilization of all available bus...
Vendor:Other Category:Other
The GS30T48-5 is a 30W DC-DC converter designed to provide a 5V/6A isolated power source.The GS30T48-5 features a wide input voltage range (36 to 72V), lowreflected input currendand short-circuit protection.
Vendor:Other Category:Other
The GS3044 CIC hybrid features AGC-O capability for low distortion output limiting with an active low cut filter in a package size suitable for CIC instruments. The circuit consists of an AGC preamplifier and output stag...
Vendor:Other Category:Other
The GS3026 CIC hybrid features AGC-O capability for low distortion output limiting and offers a package size suitable for CIC instruments. The circuit consists of a newly designed AGC preamplifier and output stage, capa...
Vendor:Other Category:Other
The GS3024A is a Gennum proprietary hybrid for CIC applications. It incorporates a newly designed integrated circuit which offers optimum performance in class D receiver applications.The GS3024A system consists of a volt...
Vendor:Other Category:Other
DynamEQ® I (GS3023) hybrid is a dual channel level dependent input compression amplifier.
This GS3023 WDRC (Wide Dynamic Range Compression) system can be easily configured to provide either a TILL (Treble Increases ...
Vendor:Other Category:Other
The DynamEQ® I hybrid GS3020 is a dynamically adaptive loudness growth equalizer. GS3020's gain and frequency response is dependent on the user's environment, and is designed for level dependant frequency response pr...
Vendor:Other Category:Other
The hybrid consists of Gennum's LS509 class A amplifier,four capacitors, and two selectable bias resistors. This hybrid GS3019 is very similar to Gennum's 3010 with the exception that capacitors C2 and C3 on the GS3019 h...
Vendor:Other Category:Other
The GS3018K utilized advanced processing techniques to achieve the lowest possible on-resistance, extremely efficient and cost-effectiveness device.The GS3018K is universally used for all commercial-industrial applicatio...
Vendor:Other Category:Other
The GS3015 incorporates Gennum's GL504 preamp, three of the required capacitors and a mid supply referencing 48K resistor. All that is required for a fully functional hearing aid system is the addition of a microphone, r...
Vendor:Other Category:Other
The GS3013 is a linear hybrid containing three amplifier stages.GS3013 incorporates a current mode class H power amplifier.By adapting the bias of the output stage to the requirements of the signal being processed, signi...
Vendor:Other Category:Other
The DynamEQ® I hybrid GS3011 is a dynamically adaptive loudness growth equalizer. GS3011's gain and frequency response is dependent on the user's environment, and GS3011 is designed for level dependant frequency res...
Vendor:Other Category:Other
The GS300T48-5 is a 300W DC-DC converters used to generate a 5.075V isolated output with a current of 60A from a wide range input voltage (38 to 60V).
Vendor:Other Category:Other
The GS3001 incorporates Gennum's GL504 preamp, all the required coupling and decoupling capacitors, and a midsupply referencing 48 kW resistor. GS3001 is required further for a fully functioning hearing aid system is the...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The GS2TX-9A is a 2.25W unregulated DC-DC converter designed to provide power, voltage regulation and isolation for Local Area Network (CHEAPERNET and ETHERNET) transceivers from a wide range of input voltage, according ...
Vendor:Other Category:Other
The GS2TX-9 is a 2.25W unregulated DC-DC converter designed to provide power, voltage regulation and isolation for Local Area Network (CHEAPERNET and ETHERNET) transceivers from a wide range of input voltage, according t...
Vendor:Other Category:Other
The GS2T5-D5 is a 2W DC-DC converter designed to provide an isolated +5V/200mA and -5V/200mA power source.The GS2T5-D5 operates from a 5V input source and offers 2500Vdc isolation.
Vendor:Other Category:Other
The GS2T5-D12 is a 2W DC-DC converter designed to provide an isolated +12V/100mA and -12V/100mApower source.The GS2T5-D12 operates from a 5V input source and offers 2500Vdc isolation.
Mfg:ST Pack:07+ Vendor:Other Category:Other
The GS2T5-9 is a 2.25W unregulated DC-DC converter designed to provide power, voltage regulation and isolation for Local Area Network (CHEAPERNET and ETHERNET) transceivers from a standard 5V input voltage, according to ...
Vendor:Other Category:Other
The GS2T5-5D15 is a 2.3WDC-DC converter designedto provide anisolated 5V/50mA,+15V/70mA and 15V/70mApower source.The GS2T5-5D15 operates from a 5V input source and offers 2500Vdc isolation.
Vendor:Other Category:Other
The GS2T5-5 is a 2WDC-DC converter designed to provide an isolated 5V/400mApower source.The GS2T5-5 operates from a 5V input source and it offers 1500VDC isolation.
Vendor:Other Category:Other
The GS2T5-12 is a 2.4W DC-DC converter designed to provide an isolated 12V/200mA power source.The GS2T5-12 operates from a 5V input source and features continuous short-circuit protection. An input filter minimizes the r...
Vendor:Other Category:Other
The GS2T48-D12 is a 2.4WDC-DC converter designed to provide an isolated +12V/100mA and -12V/100mApower source.The GS2T48-D12 operates from wide input range (38 to 60V) and offers low reflected input current and continuou...
Vendor:Other Category:Other
The GS2T12-9S is a 2.25W unregulated DC-DC converter designed to provide power, voltage regulation and isolation for Local Area Network (CHEAPERNET and ETHERNET) transceivers from a wide range of input voltage, according...
Vendor:Other Category:Other
The GS2T12-9A is a 2.25W unregulated DC-DC converter designed to provide power, voltage regulation and isolation for Local Area Network (CHEAPERNET and ETHERNET) transceivers from a wide range of input voltage, according...
Vendor:Other Category:Other
The GS2T12-9 is a 2.25W DC-DC converter designed to provide power, voltage regulation and isolation for Local Area Network (CHEAPERNET and ETHERNET) transceivers froma wide range of input voltage, according to IEEE 802.3...
Vendor:Other Category:Other
The GS2N7002K utilized advanced processing techniques to achieve the lowest possible on-resistance, extremely efficient and cost-effectiveness device.The GS2N7002K is universally used for all commercial-industrial applic...
Vendor:Other Category:Other
The GS2N7002 is universally used for all commercial-industrial surface mount applications.
Mfg:GULF Pack:SMB D/C:2007 Vendor:Other Category:Other
Mfg:GULF Pack:SMB D/C:2007 Vendor:Other Category:Other
Mfg:GULF Pack:SMB D/C:2007 Vendor:Other Category:Other
Mfg:GULF Pack:SMB D/C:2007 Vendor:Other Category:Other
Mfg:GULF Pack:SMB D/C:2007 Vendor:Other Category:Other
Mfg:GULF Pack:SMB D/C:2007 Vendor:Other Category:Other
Mfg:GULF Pack:SMB D/C:2007 Vendor:Other Category:Other
Vendor:Other Category:Other
The GS2989 is a high-speed BiCMOS integrated circuit designed to drive one to four 75Ω coaxial cables.
The GS2989 may drive data rates up to 2.97Gb/s and provides two selectable slew rates in order to achieve com...
Vendor:Other Category:Other
The GS2988 is a high-speed BiCMOS integrated circuit designed to drive one to two 75Ω coaxial cables.
The GS2988 may drive data rates up to 2.97Gb/s and provides two selectable slew rates in order to achieve comp...
Vendor:Other Category:Other
The GS2986 is a multi-rate serial digital reclocker designed to automatically recover the embedded clock from a digital video signal and retime the incoming video data. It will recover the embedded clock signal and retim...
Vendor:Other Category:Other
The GS2985 is a multi-rate serial digital reclocker designed to automatically recover the embedded clock from a digital video signal and retime the incoming video data. It will recover the embedded clock signal and retim...
Vendor:Other Category:Other
The GS2984 is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75Ω coaxial cable.
The GS2984 is designed to support SMPTE 424M, SMPTE292M and SMPTE 259M, and is optimi...
Vendor:Other Category:Other
The GS2978 is a high-speed BiCMOS integrated circuit designed to drive one or two 75 Ohm co-axial cables.The GS2978 may drive data rates up to 2.97Gb/s and provides two selectable slew rates in order to achieve complianc...
Vendor:Other Category:Other
The GS2975A is a Multi-Rate Serial Digital Reclocker designed to automatically recover the embedded clock from a digital video signal and re-time the incoming video data.The GS2975A Serial Digital Reclocker will recover ...
Vendor:Other Category:Other
The GS2975 is a Multi-Rate Serial Digital Reclocker designed to automatically recover the embedded clock from a digital video signal and re-time the incoming video data.The GS2975 Serial Digital Reclocker will recover th...
Vendor:Other Category:Other
The GS2974B is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75Ω co-axial cable.
The GS2974B is designed to support SMPTE 424M, SMPTE 292M and SMPTE 259M, and is op...
Vendor:Other Category:Other
The GS2974A is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75Ohm co-axial cable.The GS2974A is designed to support SMPTE 424M, SMPTE 292M and SMPTE 259M, and is optimized...
Vendor:Other Category:Other
The GS2974 is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75Ohm co-axial cable.The GS2974 is designed to support SMPTE 424M, SMPTE 292M and SMPTE 259M, and is optimized f...
Vendor:Other Category:Other
The GS2972 is a complete SDI transmitter, generating a SMPTE 424M, SMPTE 292M, SMPTE 259M-C or DVB-ASI compliant serial digital output signal.
The integrated ClockCleaner™ allows the GS2972 to accept parallel clo...
Vendor:Other Category:Other
The GS2971 is a multi-rate SDI integrated Receiver which includes complete SMPTE processing, as per SMPTE 425M (Level A and Level B), SMPTE 424M, 292M and SMPTE 259M-C. The SMPTE processing features can be bypassed to su...
Vendor:Other Category:Other
The GS2970 is a multi-rate SDI receiver which includes complete SMPTE processing, as per SMPTE 425M, 292M and SMPTE 259M-C. The SMPTE processing features can be bypassed to support signals with other coding schemes.
Th...
Vendor:Other Category:Other
The GS2965 is a multi-rate serial digital reclocker designed to automatically recover the embedded clock from a digital video signal and retime the incoming video data. It will recover the embedded clock signal and retim...
Vendor:Other Category:Other
The GS2964 is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75Ω coaxial cable.
The GS2964 is designed to support SMPTE 424M, SMPTE292M and SMPTE 259M, and is optimi...
Vendor:Other Category:Other
The GS2962 is an SDI transmitter, generating a SMPTE 424M, SMPTE 292M, SMPTE 259M-C or DVB-ASI compliant serial digital output signal.
The integrated ClockCleaner™ GS2962 allows the device to accept parallel cloc...
Vendor:Other Category:Other
The GS2961 is a multi-rate SDI integrated Receiver which includes complete SMPTE processing, as per SMPTE 425M (Level A and Level B), SMPTE 424M, 292M and SMPTE 259M-C. The SMPTE processing features can be bypassed to su...
Vendor:Other Category:Other
The GS2960 is a multi-rate SDI receiver which includes complete SMPTE processing, as per SMPTE 425M, 292M and SMPTE 259M-C. The SMPTE processing features can be bypassed to support signals with other coding schemes.
Th...
Vendor:Other Category:Other
The GS2914 is a high-speed BiCMOS integrated circuit designed to provide AGC and DC restoration of signals from an optical receiver.
The GS2914 is designed to support SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M, ...
Vendor:Other Category:Other
The GS2911 is a positive voltage output, three-pin regulator that provides a high current even when the input/output voltage differential is small. Low power consumption and high accuracy is achieved through CMOS and las...
Vendor:Other Category:Other
The GS2905 series is a group of positive voltage output, three-pin regulators, that provide a high current even when the input/output voltage differential is small. Low power consumption and high accuracy of GS2905 is ac...
Vendor:Other Category:Other
Vendor:Other Category:Other
The GS25T48-5, GS30T48-12 and GS30T48-15 are isolated DC-DC converters designed for general purpose application.The output power of GS25T48-5 is in the range of 25W to 30W. To ensure very long life, these converters do n...
Vendor:Other Category:Other
The GS25T24-5, GS30T24-12 and GS30T24-15 are isolated DC-DC converters designed for general purpose application.The output power of GS25T24 is in the range of 25Wto 30W.To ensure very long life, these converters do not ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The GS24T48-12 is a 24W DC-DC converter designed to provide a 12V/2A isolated power source.The GS24T48-12 featuresa wide input voltage range (36 to 72V), lowreflected input currendand short-circuit protection.
Vendor:Other Category:Other
The GS228U is designed for bias circuit and protection circuit.
Vendor:Other Category:Other
GS2237-108 is a kind of single-channel, low power, programmable transceiver with integrated framer and line drivers. GS2237-108 provides low power, high density solutions for 2-wire DSL equipment. The XDSL2 DSL chip cont...
Vendor:Other Category:Other
The GS20AC-12 is an AC-DC switching power supply able to deliver 20W output power (12V/1.7A).Two versions of the INPUT PLUG ADAPTOR are available:EUROPEAN VERSION GS20AC-12-1 (ORDERING NUMBER)UK VERSION:GS20AC-12-2 (ORDE...
Vendor:Other Category:Other
The GS204U is designed for bias circuit and protection circuit.
Vendor:Other Category:Other
The GS1T70-D540/1 converter has been designed for the "U" interface of an ISDN-NTBA (Network Termination Basic Access) system with either 4B3T or 2B1Q standard trasmission.GS1T70-D540/1 meets the requirements of the foll...
Vendor:Other Category:Other
The GS1T70-D540Fconverter has been designed for the "U" interface of an ISDN-NTBA (Network Termination BasicAccess) systemwith either 4B3T or 2B1Qstandard trasmission.GS1T70-D540F meets the requirements of the following ...
Mfg:ST Pack:04+ Vendor:Other Category:Other
The GS1T70-D540/2 converter has been designed for the "U" interface of an ISDN-NTBA (Network Termination Basic Access) system with either 4B3T or 2B1Q standard trasmission. Two outputs, 5V/72mA and 40V/12mA are supplied....
Mfg:ST Pack:04+ Vendor:Other Category:Other
The GS1T70-D540/1 converter has been designed for the "U" interface of an ISDN-NTBA (Network Termination Basic Access) system with either 4B3T or 2B1Q standard trasmission.GS1T70-D540/1 meets the requirements of the foll...
Vendor:Other Category:Other
The GS1T5-5D15 is a 0.6WDC-DC converter designedto providean isolated5V/20mA, +15V/15mA and 15V/15mApower source.The GS1T5-5D15 operates from a 5V input source and offers 2500VDC isolation.
D/C:04+ Vendor:Other Category:Other
The GS1T5-5 is a 1W DC-DC converter designed to provide an isolated 5V/250mA power source.The GS1T5-5 operates from a 5V input source and it offers 2500VDC isolation.
Mfg:PANJIT Pack:DO-214AC(SMA) D/C:07+ Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.