2A3A tube push-pull power amplifier circuit

Published:2011/9/25 22:26:00 Author:Ecco | Keyword: tube , push-pull , power amplifier | From:SeekIC

2A3 is a low ESR and direct-thermal transistor, and the internal resistance is only 800Ω, so the output transformer primary screen load impedance needs 3.5kΩ. Push-pull power amplifier tube's screen voltage takes 360 ​​~ 380V, cathode-to-ground voltage is 60 ~ 80V, and the total operating current of amplifier is 80 ~ 100mA, the maximum output power is up to 15W. Local distortion factor is 1% to 2%, and frequency response is ± 2dB in the range of 20Hz ~ 40kHz.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/2A3A_tube_push_pull_power_amplifier_circuit.html

Print this Page | Comments | Reading(3)