2_watt_AF_power_amplifier_with_8_ohm_load_connected_to_ground

Published:2009/7/20 4:43:00 Author:Jessie | From:SeekIC

2-watt AF power amplifier with 8-ohm load connected to ground. Rated output of 2 watts is obtained with a power supply voltage of 12 volts. At 9 volts with the same load a rated output of 1.2 watts is obtained. With a 4-ohm load at 9 volts 1.6 watts is obtained. Capacitor C6 must be used when high ripple rejection is required. The ECG1117 is a 14-pin QIP (courtesy GTE Sylvania Incorporated).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/2_watt_AF_power_amplifier_with_8_ohm_load_connected_to_ground.html

Print this Page | Comments | Reading(3)