Published:2011/8/16 22:00:00 Author:Rebekka | Keyword: dual-channel headphone amplifier | From:SeekIC
Figure shows the typical circuit of LM4921 stereo headphone amplifier. SPI interface bus J1 input controls lines signal: serial data signal SPI-DATA, serial enable signal SPI-ENABLE, serial clock signal SPI-CLK. J2 input of the I2S interface bus controls the full range of serial digital audio signal: I2S data signals I2S-DATA, I2S clock I2S-CLK. I2S word select signal I2S-WS (also known as the Right / Left Select). MCLK signal is input from P1: When S1 is off, it selects the external master clock MCLK input; when S1 is short, it uses internal oscillator (11.2896MHz).
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Amplifier_Circuit/LM4921_for_dual_channel_headphone_amplifier_typical_circuit_diagram.html
Print this Page | Comments | Reading(3)
Code: