Published:2011/8/16 21:49:00 Author:Rebekka | Keyword: two-channel headph amplifier | From:SeekIC
Figure shows the LM4808 for dual-channel amplifier typical circuit. Left and right channel audio signals are inputed LM4808 2, 6 feet respectively. After being amplified by internal amplifier, then they will be output by the foot 1, 7 respectively. The coupling capacitor Co isadded to the speaker. Amplifier gain is determined by resistors Ri and Rf, Av = Rf / Ri. The maximum power is PDMAX=VDD2/2π2RL. The LM4808 packaging has two amplifiers, so the total power consumption should be multiplied by 2.It is applied in a large temperature rangeenvironment , LM4808 does not install the heat sink. External input resistors and capacitors determine the input-3dB bandwidth: Input-3dB bandwidth fi-3db = 1/2πRiCi; Output-3dB bandwidth fo-3dB = 1/2πRLCo.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Audio_Circuit/LM4808_typical_circuit_diagram_for_two_channel_headphone_amplifier.html
Print this Page | Comments | Reading(3)
Code: