VELOCITY_RESPONSE_PHONO_PREAMP

Published:2009/7/14 23:03:00 Author:Jessie | From:SeekIC

Designed for use with wide range of ceramic cartridge capacitances. Input impedance, which is 30K at 40 cps, decreases with increasing frequency to give velocity response from cartridge, so that preamp frequency response is like that required for a magnetic cartridge. Output is equalized within 1.6 db from 40 cps to 12 kc.- Transistor Manual, Seventh Edition, General Electric Co., 1964, p 258.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Audio_Circuit/VELOCITY_RESPONSE_PHONO_PREAMP.html

Print this Page | Comments | Reading(3)