7447 pin configuration

Published:2013/10/9 19:56:00 Author:lynne | Keyword: 7447 pin configuration | From:SeekIC

According to the 7447 datasheet the 7446A and 7447A ICs feature active-low outputs designed for driving common-anode LEDs or incandescent indicators directly. All of the circuits have full ripple-blanking input/output controls and a lamp test input. Segment identification and resultant displays are shown on a following page. Display patterns for BCD input counts above nine are unique symbols to authenticate input conditions. All of the circuits incorporate automatic leading and/or trailing-edge, zero-blanking control (RBI and RBO). Lamp test (LT) of these devices may be performed at any time when the BI/RBO node is at a high logic level. All types contain an overriding blanking input (BI) which can be used to control the lamp intensity (by pulsing) or to inhibit the outputs. 7447 Datasheet Features All circuit types feature lamp intensity modulation capability Open-collector outputs drive indicators directly Lamp-test provision Leading/trailing zero suppression



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/7447_pin_configuration.html

Print this Page | Comments | Reading(3)