ADJUSTABLE_NOISE_CLIPPER

Published:2009/6/24 5:22:00 Author:May | From:SeekIC

This circuit uses two diodes and is a peak-to-peak limiter. The capacitors charge up to a dc level determined by the peak-to-peak audio signal and the clipping control. A positive or negative peak or spike is clipped if it exceeds this level plus the diode drops. The circuit should be operated at several volts level for best results.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Analog_Circuit/ADJUSTABLE_NOISE_CLIPPER.html

Print this Page | Comments | Reading(3)