FOUR_INPUT_STEREO_MIXER

Published:2009/6/24 2:05:00 Author:May | From:SeekIC

Four (or more) inputs can be mixed and produce stereo output. Gain of each stage can be boosted by adding RX, but it should be kept below 50 (RX above 2.2 K) to avoid poor fre-quency, response. If more than four stages are used, decrease RX to 6.8 K for six inputs, or 4.7 K for eight inputs. The op amps are 741 or other lower noise types. The power supply circuit is also given.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Analog_Circuit/FOUR_INPUT_STEREO_MIXER.html

Print this Page | Comments | Reading(3)