GRAY_TO_BINARY

Published:2009/6/30 21:15:00 Author:May | From:SeekIC

Convelts first 4 bits of Gray-code word to binary output. Uses two MC7496 shift registers and logic elements to transfer data serially from input register through MC1812 EXCLUSIVE-ORIC to output register. One requirement is that strobe on pin 8 of input register must complete its function before clock appears on pin 1 of register. When this and other timing conditions are satisfied, converter will work at speeds up to about 10 megabits per second.—J. Barnes, Analog-to-Digital Cyclic Converter, Motorola, Phoenix, AZ, 1974, AN-557, p 9.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/GRAY_TO_BINARY.html

Print this Page | Comments | Reading(3)