Gain buffer circuit

Published:2012/9/10 21:12:00 Author:Ecco | Keyword: Gain buffer | From:SeekIC

The difference between these amplified signals is used to set the 's bias and hence Ql Q2 current channel. This Ql forces of V GS at all that is required voltage corresponding to the circuit input and potential output. The capacitor of 2000 pF to Al provides stable loop compensation. The RC network at the output of Amnesty International that it obscures the edges at high speed coupled through Q2 's base-collector junction. A2 exit from the east also returned to the screen around Ql cause the door, the boot capacity of the circuit comes into force unless I pF. Source: discovercircuits



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Gain_buffer_circuit.html

Print this Page | Comments | Reading(3)