Published:2012/9/19 3:34:00 Author:Ecco | Keyword: Motor winding, heating , drying , welding transformer | From:SeekIC
For three - phase motor, the heating single phase power supply should be controlled about 110V, it can use a welding transformer to reduce the power supply voltage to 380V or 220V and access to the three-phase stator windings connected in series, and the circuit is shown in Fig. A stator winding current ( measured by the ammeter A ) is 70 % to 80% of the rated motor current, when it is energized 7 to 8 hours, the motor will be dried.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Motor_winding_heating_and_drying_circuit_with_welding_transformer.html
Print this Page | Comments | Reading(3)
Code: