Op_amp_notch_filter_high_Q

Published:2009/7/24 23:02:00 Author:Jessie | From:SeekIC

This circuit uses a single LM102 in the twin-T configuration to form a high-Q notch filter. Figure 10-42B shows the filter characteristics at 60 Hz. Other frequencies can be selected with different values, as shown by the equations.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Op_amp_notch_filter_high_Q.html

Print this Page | Comments | Reading(3)