The lathe no-load automatically shut-down and power - saving circuit 1

Published:2012/9/10 22:52:00 Author:Ecco | Keyword: lathe , no-load, automatically shut-down, power - saving | From:SeekIC

When the lathe workers operate lathe, the spindle needs to stop rotating, they are accustomed to placing operating lever in the parking position, then they will leave the lathe do other things and ignore to press the stop button, that will waste of energy because of the motor no-load operation for a long time. The circuit shown as the figure can avoide motor from idling.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/The_lathe_no_load_automatically_shut_down_and_power___saving_circuit_1.html

Print this Page | Comments | Reading(3)