Published:2012/10/11 21:25:00 Author:Ecco | Keyword: typical application , 5 - channel , low-power , programmable sensor, signal processor | From:SeekIC
The AD7714's UDD, UDDA end can be connected to +3 V or +5 V power supply. The analog input terminal is configured to three differential pair of inputs. AD780 provides precision +2.5 V reference voltage. CS terminal is connected to DGND, AD7714 is configured as a 3-wire serial interface. Master clock provides quartz crystal ( or ceramic resonator ). In some special applications, the UDD and UDDA end are respectively driven by two independent power supply.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/The_typical_application_circuit_of_5___channel_low_power_programmable_sensor_signal_processor_AD7714.html
Print this Page | Comments | Reading(3)
Code: