WIDE_RANGE_VOLTAGE_TO_FREQUENCY_CONVERTER

Published:2009/7/9 5:13:00 Author:May | From:SeekIC

This circuit is based upon the change of frequency of the function generator with the input voltage VIN Generally, the frequency depends upon the capacitance and resistor connected to pin 6. This resistor is replaced by the FET. The frequency range is adjustable by changing the input voltage, VIN; the converter will give a range of 10 Hz to 1 MHz.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/WIDE_RANGE_VOLTAGE_TO_FREQUENCY_CONVERTER.html

Print this Page | Comments | Reading(3)