Flash_Signal_Alarm

Published:2009/6/17 0:32:00 Author:May | From:SeekIC

This circuit is useful if you need a low-energy flashing alarm. The 200 to 400-dc supply should have enough internal resistance to charge the 0.5 μF capacitor between flashes, about 2 or 3 time constants, which means about 500 kΩ to 1 MΩ for a 1-s rate. Use lower values for higher rates.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Alarm_Control/Flash_Signal_Alarm.html

Print this Page | Comments | Reading(3)