Blanking Automatic Adjustment Circuit

Published:2011/5/3 6:21:00 Author:Christina | Keyword: Blanking, Automatic Adjustment | From:SeekIC

The hot mill machine which can be used to manufacture the fibreboard, it mills the pieces of wood into fiber pulp, the wood falls from the silo into hot mill machine's feed port channel, the channel has this device. When the wood falling into the feed port channel, and the wood stack height is lower than a certain range, this device controls the hopper vibrator automaticly to let the wood falls down. If the wood stack height is higher than a certain range, this device closes the hopper vibrator to achieve the purpose of automatic control.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Blanking_Automatic_Adjustment_Circuit.html

Print this Page | Comments | Reading(3)